[Thu May  2 01:17:04 2013] Detection parameters:
  Position = (318.6, 398.0) = 12 52 46.11 -29 18 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.6 +/- 11.3
  Background counts = 14.6
  Rate = 0.001 +/- 0.0002

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 7.36'
[Thu May  2 01:17:50 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Thu May  2 01:17:50 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.878
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 10.11"
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src32.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src32.csv
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src32.csv
[Thu May  2 01:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu May  2 01:17:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu May  2 01:17:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu May  2 01:17:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:18:26 2013] Spatial fit model total counts = 237.379000, observed total counts = 196.000000
[Thu May  2 01:18:26 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:26 2013] Deleting source due to low Poisson probability 0.9