[Thu May  2 01:17:04 2013] Detection parameters:
  Position = (333.2, 451.1) = 12 52 41.28 -29 14 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.7 +/- 11.4
  Background counts = 22.7
  Rate = 0.0006 +/- 0.0002

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 11.35'
[Thu May  2 01:17:50 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Thu May  2 01:17:50 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.835
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 12.10"
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src61.ximg exists
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu May  2 01:17:52 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src61 appears to have run properly
[Thu May  2 01:17:53 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu May  2 01:17:53 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu May  2 01:17:53 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Thu May  2 01:18:26 2013] Spatial fit model total counts = 484.962000, observed total counts = 479.000000
[Thu May  2 01:18:26 2013] Offset between fit and detection position for source 18 = 0.970964 pixels
[Thu May  2 01:18:26 2013] Warning, changing simple spatial fit ID from 61 to 59
[Thu May  2 01:18:26 2013] 458.491000 total counts/ 190.248000 bgd. counts: snr = 19.447705
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.970964 pixels
  Position = (333.0, 450.1) = 12 52 41.33 -29 14 26.4
  Extent = 24.4 (24.4-48.9)", rotation angle = 0
  Source counts = 268.2 +/- 21.4
  Background counts = 190.2
  Rate = 0.004 +/- 0.0003
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 01:18:59 2013] Initial guess for spatial extent in simple fitting = 24.43"
[Thu May  2 01:18:59 2013] source mask rpix=5.6, npix_max = 149, mask sum = 144, frac = 0.962
[Thu May  2 01:18:59 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 24.43"
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src19.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src19.csv
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src19.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:25 2013] Warning, spatial fit 19 centroid is now closest to src. 4
[Thu May  2 01:19:25 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:25 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:25 2013] Source does appear to be extended
[Thu May  2 01:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:21:05 2013] XMMSAS src. selection expression = ellipse(28922.710000, 39112.820000, 1465.848042, 1465.848042, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Not overwriting source region fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18_src.reg
[Thu May  2 01:21:05 2013] Extracting stamp from image fullrun_mos1_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (249, 366) - (417, 534)
[Thu May  2 01:21:05 2013] XMMSAS bgd. selection expression = annulus(28922.710000, 39112.820000, 2443.080070, 4886.160141, X, Y) && !ellipse(33339.844000, 38544.588600, 2737.632079, 2737.632079, 0.000000, X, Y) && !ellipse(32315.316803, 38824.742401, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(30595.083496, 40093.124237, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Writing fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18.gif
[Thu May  2 01:25:21 2013] Mean detx,y = (-12155.87, -9579.85) 
[Thu May  2 01:25:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 01:26:02 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 01:26:02 2013] Setting source spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May  2 01:26:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May  2 03:13:22 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:22 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 962.00
[Thu May  2 03:13:22 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1863.00
[Thu May  2 03:13:22 2013] Got source and background scale factors 5518333.000000, 19275858.000000
[Thu May  2 03:13:22 2013] User source parameters:
  Position = (333.0, 450.1) = 12 52 41.33 -29 14 26.4
  Extent = 24.4 (24.4-48.9)", rotation angle = 0
  Source aperture counts = 428.7 +/- 32.0
  Background aperture counts = 533.3
  Rate = 0.006 +/- 0.0005

[Thu May  2 03:13:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:22 2013] Using photon index=1.80, rate=0.00396, arf fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18.arf
[Thu May  2 03:13:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:22 2013] Updating source flux to 1.1e-13
[Thu May  2 03:13:41 2013] xmm0057740401/analysis//spectral/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete