[Thu May  2 01:17:04 2013] Detection parameters:
  Position = (352.2, 461.4) = 12 52 34.94 -29 13 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.5 +/- 16.5
  Background counts = 17.2
  Rate = 0.002 +/- 0.0002

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 12.44'
[Thu May  2 01:17:50 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Thu May  2 01:17:50 2013] source mask rpix=2.9, npix_max = 46, mask sum = 44, frac = 0.947
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 12.65"
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src19.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src19.csv
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src19.csv
[Thu May  2 01:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May  2 01:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May  2 01:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May  2 01:17:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:18:26 2013] Warning, spatial fit 19 centroid is now closest to src. 17
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:26 2013] Source is confused with source 4
[Thu May  2 01:18:59 2013] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:59 2013] Initial guess for spatial extent in simple fitting = 12.65"
[Thu May  2 01:18:59 2013] source mask rpix=2.9, npix_max = 46, mask sum = 44, frac = 0.947
[Thu May  2 01:18:59 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 12.65"
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src15.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src15.csv
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src15.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:25 2013] Spatial fit model total counts = -1085.710000, observed total counts = 773.000000
[Thu May  2 01:19:25 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 01:19:25 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:25 2013] Assessing source extent using major
[Thu May  2 01:19:25 2013] Source does appear to be extended
[Thu May  2 01:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:21:05 2013] XMMSAS src. selection expression = ellipse(30595.083496, 40093.124237, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Not overwriting source region fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16_src.reg
[Thu May  2 01:21:05 2013] Extracting stamp from image fullrun_mos1_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (315, 424) - (390, 499)
[Thu May  2 01:21:05 2013] XMMSAS bgd. selection expression = annulus(30595.083496, 40093.124237, 1087.500000, 2175.000000, X, Y) && !ellipse(33339.844000, 38544.588600, 2737.632079, 2737.632079, 0.000000, X, Y) && !ellipse(32315.316803, 38824.742401, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(28922.710000, 39112.820000, 1954.464056, 1954.464056, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Writing fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16.gif
[Thu May  2 01:24:07 2013] Mean detx,y = (-12344.61, -11356.47) 
[Thu May  2 01:24:08 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 01:24:19 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 01:24:19 2013] Setting source spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May  2 01:24:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu May  2 01:58:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 01:58:28 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:21 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:21 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 488.00
[Thu May  2 03:13:21 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16_bgd.pi.gz = 0.00
[Thu May  2 03:13:21 2013] Got source and background scale factors 836904.000000, 899.000000
[Thu May  2 03:13:21 2013] User source parameters:
  Position = (352.2, 461.4) = 12 52 34.94 -29 13 35.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 488.0 +/- 23.1
  Background aperture counts = 0.0
  Rate = 0.007 +/- 0.0003

[Thu May  2 03:13:21 2013] Updating counts from extracted products
[Thu May  2 03:13:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:22 2013] Using photon index=1.80, rate=0.0072, arf fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16.arf
[Thu May  2 03:13:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:22 2013] Updating source flux to 3.5e-13
[Thu May  2 03:13:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 03:13:41 2013] xmm0057740401/analysis//spectral/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete