[Sat Jul 14 07:29:02 2012] Detection parameters:
  Position = (371.5, 468.8) = 12 52 29.70 -29 13 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 912.4 +/- 46.0
  Background counts = 59.0
  Rate = 0.01 +/- 0.0007

[Sat Jul 14 07:29:03 2012] Off-axis axis estimate = 13.44'
[Sat Jul 14 07:34:12 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 07:34:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 07:34:12 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Sat Jul 14 07:34:12 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.987
[Sat Jul 14 07:34:12 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.15"
[Sat Jul 14 14:28:18 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jul 14 14:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src6.csv
[Sat Jul 14 14:28:18 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jul 14 14:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src6.csv
[Sat Jul 14 14:28:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 14:28:19 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jul 14 14:28:19 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jul 14 14:28:19 2012] Fit fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jul 14 19:29:47 2012] Spatial fit model total counts = 6627.840000, observed total counts = 6632.000000
[Sat Jul 14 19:29:47 2012] Offset between fit and detection position for source 6 = 7.729180 pixels
[Sat Jul 14 19:29:47 2012] 6567.390000 total counts/ 1131.930000 bgd. counts: snr = 161.557275
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 7.729180 pixels
  Position = (373.1, 461.2) = 12 52 29.17 -29 13 36.6
  Extent = 25.5 (24.9-26.3)", rotation angle = 0
  Source counts = 5435.5 +/- 81.0
  Background counts = 1131.9
  Rate = 0.08 +/- 0.001
[Sat Jul 14 19:29:47 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:29:47 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 19:29:47 2012] Source does appear to be extended
[Sat Jul 14 19:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:29:47 2012] Source is confused with source 2
[Sat Jul 14 19:30:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 19:30:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 19:30:31 2012] Initial guess for spatial extent in simple fitting = 25.50"
[Sat Jul 14 19:30:31 2012] source mask rpix=5.9, npix_max = 161, mask sum = 156, frac = 0.963
[Sat Jul 14 19:30:31 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 25.50"
[Sun Jul 15 23:29:52 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jul 15 23:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src6.csv
[Sun Jul 15 23:29:52 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jul 15 23:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src6.csv
[Sun Jul 15 23:29:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:29:53 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jul 15 23:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jul 15 23:29:53 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jul 15 23:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jul 15 23:29:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 03:50:06 2012] Source 6 is offset by -6.393736 and -2.307839 pixels which is larger than
2 X fitted extent = 1.439614 x 1.439614, not incorporating fit results
[Mon Jul 16 03:50:06 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Mon Jul 16 03:50:07 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 03:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 03:50:07 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 03:50:07 2012] Source does appear to be extended
[Mon Jul 16 03:50:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 03:50:38 2012] Counts = 5435.460000, rescaling region sizes by 2.000000
[Mon Jul 16 03:50:38 2012] XMMSAS src. selection expression = ellipse(32413.217000, 40076.690000, 3060.420088, 3060.420088, 0.000000, X, Y)
[Mon Jul 16 03:50:38 2012] Writing source region out to fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src6_src.reg
[Mon Jul 16 03:50:38 2012] Extracting stamp from image fullrun_pn_xmm0057740301_pi300-10000_cl_sm2.00.img.gz, (197, 285) - (549, 595)
[Mon Jul 16 03:50:38 2012] XMMSAS bgd. selection expression = annulus(32413.217000, 40076.690000, 10201.400294, 20402.800587, X, Y) && !ellipse(35677.506800, 34667.533800, 621.596818, 621.596818, 0.000000, X, Y) && !ellipse(31971.620605, 39233.810730, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(33292.760000, 38722.188000, 4301.616124, 4301.616124, 0.000000, X, Y) && !ellipse(33715.611160, 38475.103200, 3231.000093, 1476.388842, 37.640000, X, Y) && !ellipse(31202.804000, 39646.510000, 657.627219, 657.627219, 0.000000, X, Y) && !ellipse(37425.499400, 38856.307400, 357.960010, 357.960010, 0.000000, X, Y) && !ellipse(37122.462000, 38230.066000, 1034.160030, 305.574409, 57.148000, X, Y) && !ellipse(35572.738000, 36711.320888, 2201.582602, 2170.671335, 41.335624, X, Y) && !ellipse(35782.408051, 35269.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36769.889000, 33588.337600, 2359.528068, 475.426414, 55.969000, X, Y) && !ellipse(36954.771740, 33281.826600, 1914.120055, 380.593611, 57.927000, X, Y) && !ellipse(37654.322780, 32163.410000, 2369.360068, 457.930413, 57.976900, X, Y) && !ellipse(38034.500200, 31527.811400, 1920.176055, 439.438413, 58.432000, X, Y) && !ellipse(38968.252045, 31777.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38148.072000, 31258.492000, 711.142420, 711.142420, 0.000000, X, Y) && !ellipse(36159.281160, 30771.643400, 497.355214, 497.355214, 0.000000, X, Y) && !ellipse(18192.779221, 21432.130020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31730.620941, 41694.237000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.904000, 40013.681200, 1998.712058, 1998.712058, 0.000000, X, Y) && !ellipse(28832.286000, 40707.318000, 1793.320052, 1793.320052, 0.000000, X, Y) && !ellipse(29731.672000, 40229.656000, 2827.104081, 2827.104081, 0.000000, X, Y) && !ellipse(29200.016000, 40083.342000, 1020.064029, 1020.064029, 0.000000, X, Y) && !ellipse(30856.226868, 38835.174011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25594.442017, 38126.079407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37562.324000, 35356.668000, 1958.992056, 1958.992056, 0.000000, X, Y) && !ellipse(36487.200000, 34033.438000, 2282.544066, 2282.544066, 0.000000, X, Y) && !ellipse(28036.214050, 34449.662994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37800.296692, 34567.280792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33796.140808, 34143.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29271.631042, 33800.054321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38208.143707, 33716.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19145.037338, 33504.069000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17764.236800, 33572.292200, 482.334414, 482.334414, 0.000000, X, Y) && !ellipse(22912.342041, 33234.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30618.256592, 32418.339905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22192.709600, 32200.829600, 398.784811, 398.784811, 0.000000, X, Y) && !ellipse(34033.580078, 32130.293121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14014.045868, 31341.191864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16826.572830, 30829.156189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27961.327280, 30678.821800, 423.745612, 423.745612, 0.000000, X, Y) && !ellipse(22223.943512, 30707.780800, 332.935210, 332.935210, 0.000000, X, Y) && !ellipse(38314.132477, 30341.658295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19345.461517, 29865.290283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20395.626000, 29556.606000, 1539.632044, 1539.632044, 0.000000, X, Y) && !ellipse(27133.790833, 29523.930511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16053.849121, 29527.403290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.194061, 26505.451599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21124.977646, 26089.889069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23931.181000, 25612.446980, 465.869613, 465.869613, 0.000000, X, Y) && !ellipse(26984.708282, 23997.654297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.808014, 23428.822235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.201200, 23646.333800, 865.032025, 865.032025, 0.000000, X, Y) && !ellipse(17887.261017, 23086.182739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25150.420227, 22819.620453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18057.700623, 22329.796753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.060699, 21282.431503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41033.373657, 19674.666565, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 03:50:38 2012] Writing fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src6.gif
[Mon Jul 16 04:19:19 2012] Mean detx,y = (-14264.07, 8129.48) 
[Mon Jul 16 04:19:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 04:25:19 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 04:25:19 2012] Setting source spectrum file to fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul 16 04:25:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jul 16 09:34:35 2012] Updating aperture counts using extracted products
[Mon Jul 16 09:34:35 2012] Error reading totcts from fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul 16 09:34:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:34:37 2012] Using photon index=1.80, rate=0.0848, arf fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src6.arf
[Mon Jul 16 09:34:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:34:37 2012] Updating source flux to 3.2e-12
[Mon Jul 16 09:36:29 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Mon Jul 16 09:36:29 2012] Flag c found in src. 6 procflags, skipping spectral fitting