[Sat Jul 14 07:29:02 2012] Detection parameters:
  Position = (410.8, 399.0) = 12 52 16.62 -29 18 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2198.6 +/- 58.9
  Background counts = 71.8
  Rate = 0.03 +/- 0.0009

[Sat Jul 14 07:29:03 2012] Off-axis axis estimate = 10.93'
[Sat Jul 14 07:34:12 2012] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 07:34:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 07:34:12 2012] Initial guess for spatial extent in simple fitting = 11.89"
[Sat Jul 14 07:34:12 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Sat Jul 14 07:34:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.89"
[Sat Jul 14 14:28:18 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 14:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 14:28:18 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 14:28:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 14:28:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 14:28:19 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 14:28:19 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 14:28:19 2012] Fit fullrun_pn_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 19:29:47 2012] Spatial fit model total counts = 5902.030000, observed total counts = 5807.000000
[Sat Jul 14 19:29:47 2012] Offset between fit and detection position for source 1 = 0.169788 pixels
[Sat Jul 14 19:29:47 2012] 6098.940000 total counts/ 4616.090000 bgd. counts: snr = 21.825293
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.169788 pixels
  Position = (410.6, 399.0) = 12 52 16.68 -29 18 6.9
  Extent = 7.8 (6.9-8.9)", rotation angle = 0
  Source counts = 1482.8 +/- 78.1
  Background counts = 4616.1
  Rate = 0.02 +/- 0.001
[Sat Jul 14 19:29:47 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:29:47 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 19:29:47 2012] Source does appear to be extended
[Sat Jul 14 19:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:29:47 2012] Source is confused with source 10
[Sat Jul 14 19:29:47 2012] Source is confused with source 13
[Sat Jul 14 19:30:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 19:30:31 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sat Jul 14 19:30:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.957
[Sat Jul 14 19:30:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.77"
[Sun Jul 15 23:29:52 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 23:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 23:29:52 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 23:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 23:29:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:29:53 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 23:29:53 2012] fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 23:29:53 2012] Fit fullrun_pn_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 16 03:50:06 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Mon Jul 16 03:50:07 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 03:50:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 03:50:07 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 03:50:07 2012] Source does appear to be extended
[Mon Jul 16 03:50:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 03:50:38 2012] Counts = 1482.850000, rescaling region sizes by 2.000000
[Mon Jul 16 03:50:38 2012] XMMSAS src. selection expression = ellipse(35677.506800, 34667.533800, 932.395227, 932.395227, 0.000000, X, Y)
[Mon Jul 16 03:50:38 2012] Writing source region out to fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 16 03:50:38 2012] Extracting stamp from image fullrun_pn_xmm0057740301_pi300-10000_cl_sm2.00.img.gz, (357, 345) - (464, 453)
[Mon Jul 16 03:50:38 2012] XMMSAS bgd. selection expression = annulus(35677.506800, 34667.533800, 3107.984089, 6215.968179, X, Y) && !ellipse(31971.620605, 39233.810730, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(33292.760000, 38722.188000, 4301.616124, 4301.616124, 0.000000, X, Y) && !ellipse(33715.611160, 38475.103200, 3231.000093, 1476.388842, 37.640000, X, Y) && !ellipse(31202.804000, 39646.510000, 657.627219, 657.627219, 0.000000, X, Y) && !ellipse(32413.217000, 40076.690000, 2040.280059, 2040.280059, 0.000000, X, Y) && !ellipse(37425.499400, 38856.307400, 357.960010, 357.960010, 0.000000, X, Y) && !ellipse(37122.462000, 38230.066000, 1034.160030, 305.574409, 57.148000, X, Y) && !ellipse(35572.738000, 36711.320888, 2201.582602, 2170.671335, 41.335624, X, Y) && !ellipse(35782.408051, 35269.217438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36769.889000, 33588.337600, 2359.528068, 475.426414, 55.969000, X, Y) && !ellipse(36954.771740, 33281.826600, 1914.120055, 380.593611, 57.927000, X, Y) && !ellipse(37654.322780, 32163.410000, 2369.360068, 457.930413, 57.976900, X, Y) && !ellipse(38034.500200, 31527.811400, 1920.176055, 439.438413, 58.432000, X, Y) && !ellipse(38968.252045, 31777.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38148.072000, 31258.492000, 711.142420, 711.142420, 0.000000, X, Y) && !ellipse(36159.281160, 30771.643400, 497.355214, 497.355214, 0.000000, X, Y) && !ellipse(31730.620941, 41694.237000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.904000, 40013.681200, 1998.712058, 1998.712058, 0.000000, X, Y) && !ellipse(28832.286000, 40707.318000, 1793.320052, 1793.320052, 0.000000, X, Y) && !ellipse(29731.672000, 40229.656000, 2827.104081, 2827.104081, 0.000000, X, Y) && !ellipse(29200.016000, 40083.342000, 1020.064029, 1020.064029, 0.000000, X, Y) && !ellipse(30856.226868, 38835.174011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37562.324000, 35356.668000, 1958.992056, 1958.992056, 0.000000, X, Y) && !ellipse(36487.200000, 34033.438000, 2282.544066, 2282.544066, 0.000000, X, Y) && !ellipse(37800.296692, 34567.280792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33796.140808, 34143.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29271.631042, 33800.054321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38208.143707, 33716.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30618.256592, 32418.339905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34033.580078, 32130.293121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38314.132477, 30341.658295, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 03:50:38 2012] Writing fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1.gif
[Mon Jul 16 03:51:00 2012] Mean detx,y = (-14089.89, 3736.99) 
[Mon Jul 16 03:51:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 03:52:09 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 03:52:09 2012] Setting source spectrum file to fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 03:52:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 16 09:34:35 2012] Updating aperture counts using extracted products
[Mon Jul 16 09:34:35 2012] Error reading totcts from fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 09:34:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:34:37 2012] Using photon index=1.80, rate=0.0231, arf fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 09:34:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:34:37 2012] Updating source flux to 1.5e-13
[Mon Jul 16 09:36:29 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jul 16 09:41:01 2012] Reading fit data from xmm0057740301/analysis//spectral/fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 16 09:41:01 2012] Spectral fit parameter nH value = 1.63342e+21
[Mon Jul 16 09:41:01 2012] Spectral fit parameter PhoIndex value = 2.69747
[Mon Jul 16 09:41:01 2012] Failed to get F(0.3-8.0) from xmm0057740301/analysis//spectral/fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 16 09:41:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:41:01 2012] Using Nh = 1.6e+21, photon index=2.70, rate=0.0231, arf fullrun_pn_xmm0057740301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 09:41:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:41:01 2012] Updating source flux to 1.3e-13