[Sat Jul 14 07:30:16 2012] Detection parameters:
  Position = (312.6, 339.1) = 12 52 49.28 -29 22 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.8 +/- 15.5
  Background counts = 20.2
  Rate = 0.002 +/- 0.0003

[Sat Jul 14 07:30:17 2012] Off-axis axis estimate = 3.12'
[Sat Jul 14 16:41:52 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:41:52 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Sat Jul 14 16:41:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Sat Jul 14 16:41:52 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.99"
[Sat Jul 14 19:29:18 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jul 14 19:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src20.csv
[Sat Jul 14 19:29:18 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jul 14 19:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src20.csv
[Sat Jul 14 19:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:29:19 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jul 14 19:29:19 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jul 14 19:29:19 2012] Fit fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Jul 14 19:30:10 2012] Spatial fit model total counts = 296.000000, observed total counts = 296.000000
[Sat Jul 14 19:30:10 2012] Offset between fit and detection position for source 43 = 0.215335 pixels
[Sat Jul 14 19:30:10 2012] 292.706900 total counts/ 197.194000 bgd. counts: snr = 6.801664
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.215335 pixels
  Position = (312.4, 339.2) = 12 52 49.35 -29 22 27.3
  Extent = 5.5 (4.3-6.6)", rotation angle = 0
  Source counts = 95.5 +/- 17.1
  Background counts = 197.2
  Rate = 0.001 +/- 0.0003
[Sat Jul 14 19:30:10 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:30:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:30:10 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 19:30:10 2012] Source does appear to be extended
[Sat Jul 14 19:30:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:54:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 23:54:42 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Sun Jul 15 23:54:42 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.964
[Sun Jul 15 23:54:42 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 5.50"
[Mon Jul 16 03:49:48 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src20.ximg exists
[Mon Jul 16 03:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src20.csv
[Mon Jul 16 03:49:48 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Jul 16 03:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src20.csv
[Mon Jul 16 03:49:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 03:49:49 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Jul 16 03:49:49 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Jul 16 03:49:49 2012] Fit fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Jul 16 03:50:22 2012] Warning, spatial fit 20 centroid is now closest to src. 39
[Mon Jul 16 03:50:23 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 03:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 03:50:23 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 03:50:23 2012] Source does appear to be extended
[Mon Jul 16 03:50:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:35:55 2012] XMMSAS src. selection expression = ellipse(27129.061800, 29465.095000, 329.932209, 329.932209, 0.000000, X, Y)
[Mon Jul 16 08:35:55 2012] Writing source region out to fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src43_src.reg
[Mon Jul 16 08:35:55 2012] Extracting stamp from image fullrun_mos2_xmm0057740301_pi300-10000_cl_sm2.00.img.gz, (293, 320) - (331, 358)
[Mon Jul 16 08:35:55 2012] XMMSAS bgd. selection expression = annulus(27129.061800, 29465.095000, 549.887016, 1099.774032, X, Y) && !ellipse(27945.282600, 30693.748600, 415.689612, 415.689612, 0.000000, X, Y)
[Mon Jul 16 08:35:55 2012] Writing fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src43.gif
[Mon Jul 16 08:41:35 2012] Mean detx,y = (4075.21, -4024.26) 
[Mon Jul 16 08:41:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 08:41:43 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 08:41:43 2012] Setting source spectrum file to fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Jul 16 08:41:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Jul 16 09:13:48 2012] Not generating rmf since there are only 95 counts
[Mon Jul 16 09:13:48 2012] rmf not generated due to insufficient counts
[Mon Jul 16 09:34:39 2012] Updating aperture counts using extracted products
[Mon Jul 16 09:34:39 2012] Error reading totcts from fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Jul 16 09:34:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:34:40 2012] Using photon index=1.80, rate=0.00142, arf fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src43.arf
[Mon Jul 16 09:34:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:34:40 2012] Updating source flux to 2e-14
[Mon Jul 16 09:35:34 2012] Source 43 has fewer than 100.000000 counts, skipping spectral fitting