[Sat Jul 14 07:30:16 2012] Detection parameters:
  Position = (375.4, 426.6) = 12 52 28.41 -29 16 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.1 +/- 18.5
  Background counts = 50.7
  Rate = 0.002 +/- 0.0003

[Sat Jul 14 07:30:17 2012] Off-axis axis estimate = 10.84'
[Sat Jul 14 16:41:52 2012] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:41:52 2012] Initial guess for spatial extent in simple fitting = 11.85"
[Sat Jul 14 16:41:52 2012] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.179
[Sat Jul 14 16:41:52 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 11.85"
[Sat Jul 14 19:29:18 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jul 14 19:29:18 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jul 14 19:29:18 2012] Fit fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_src24 appears to have run properly
[Sat Jul 14 19:29:19 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jul 14 19:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jul 14 19:29:19 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jul 14 19:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jul 14 19:29:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:30:10 2012] Spatial fit model total counts = 709.029000, observed total counts = 739.000000
[Sat Jul 14 19:30:10 2012] Offset between fit and detection position for source 10 = 1.320174 pixels
[Sat Jul 14 19:30:10 2012] 527.375000 total counts/ 191.348000 bgd. counts: snr = 24.291941
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.320174 pixels
  Position = (375.8, 425.3) = 12 52 28.26 -29 16 12.7
  Extent = 17.9 (13.6-23.7)" x 9.1 (7.4-12.3)", rotation angle = 240 (230-250) degrees
  Source counts = 336.0 +/- 23.0
  Background counts = 191.3
  Rate = 0.005 +/- 0.0003
[Sat Jul 14 19:30:10 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:30:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:30:10 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 19:30:10 2012] Source does appear to be extended
[Sat Jul 14 19:30:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Sat Jul 14 19:30:10 2012] Source is confused with source 20
[Sat Jul 14 19:30:10 2012] Source is confused with source 23
[Sun Jul 15 23:54:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 23:54:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 23:54:42 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Sun Jul 15 23:54:42 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.948
[Sun Jul 15 23:54:42 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.47"
[Mon Jul 16 03:49:48 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src23.ximg exists
[Mon Jul 16 03:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src23.csv
[Mon Jul 16 03:49:48 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Jul 16 03:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src23.csv
[Mon Jul 16 03:49:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 03:49:50 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Jul 16 03:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jul 16 03:49:50 2012] fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Jul 16 03:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jul 16 03:49:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 03:50:22 2012] Warning, spatial fit 23 centroid is now closest to src. 2
[Mon Jul 16 03:50:22 2012] Spatial fit model total counts = 1231.690000, observed total counts = 967.000000
[Mon Jul 16 03:50:22 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 03:50:22 2012] Source 10 is offset by -1.755510 and -2.144402 pixels which is larger than
2 X fitted extent = 1.319117 x 1.319117, not incorporating fit results
[Mon Jul 16 03:50:23 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 03:50:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 03:50:23 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 03:50:23 2012] Source does appear to be extended
[Mon Jul 16 03:50:23 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Mon Jul 16 08:35:55 2012] XMMSAS src. selection expression = ellipse(32647.774600, 36955.355000, 1071.792031, 544.102816, 240.472000, X, Y)
[Mon Jul 16 08:35:55 2012] Writing source region out to fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src10_src.reg
[Mon Jul 16 08:35:55 2012] Extracting stamp from image fullrun_mos2_xmm0057740301_pi300-10000_cl_sm2.00.img.gz, (314, 364) - (437, 487)
[Mon Jul 16 08:35:55 2012] XMMSAS bgd. selection expression = annulus(32647.774600, 36955.355000, 1786.320051, 3572.640103, X, Y) && !ellipse(34899.764801, 37308.271973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35653.716125, 34672.106659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31136.165192, 39610.758514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35661.413055, 36825.282318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31794.036316, 38393.066498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35641.898590, 37471.354492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34358.114929, 36921.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33584.986328, 36390.659332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36252.550018, 35814.358673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30788.600616, 38666.632751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30079.168823, 38607.648621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31159.884000, 37495.926000, 1891.296054, 1891.296054, 0.000000, X, Y) && !ellipse(30928.482000, 37170.930000, 1897.808055, 1897.808055, 0.000000, X, Y) && !ellipse(33771.374695, 34183.241425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29241.435394, 40302.414886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32355.556427, 36176.589630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35790.720947, 35969.489380, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 08:35:55 2012] Writing fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src10.gif
[Mon Jul 16 08:42:32 2012] Mean detx,y = (12475.96, -7479.19) 
[Mon Jul 16 08:42:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 08:42:59 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 08:42:59 2012] Setting source spectrum file to fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul 16 08:42:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jul 16 09:34:39 2012] Updating aperture counts using extracted products
[Mon Jul 16 09:34:39 2012] Error reading totcts from fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul 16 09:34:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:34:40 2012] Using photon index=1.80, rate=0.00498, arf fullrun_mos2_xmm0057740301_pi300-10000_pass1_cl_src10.arf
[Mon Jul 16 09:34:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:34:40 2012] Updating source flux to 1.5e-13
[Mon Jul 16 09:35:34 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Mon Jul 16 09:35:34 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Mon Jul 16 09:35:34 2012] Flag c found in src. 10 procflags, skipping spectral fitting