[Sat Jul 14 07:29:37 2012] Detection parameters:
  Position = (404.6, 434.9) = 12 52 18.70 -29 15 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 915.4 +/- 45.6
  Background counts = 16.8
  Rate = 0.01 +/- 0.0007

[Sat Jul 14 07:29:39 2012] Off-axis axis estimate = 12.53'
[Sat Jul 14 14:28:21 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:28:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 14:28:21 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Sat Jul 14 14:28:21 2012] source mask rpix=2.9, npix_max = 46, mask sum = 43, frac = 0.920
[Sat Jul 14 14:28:21 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.70"
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src2.csv
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src2.csv
[Sat Jul 14 16:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jul 14 16:41:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jul 14 16:41:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jul 14 16:41:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:29:57 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.830167 pixels away
[Sat Jul 14 19:29:57 2012] Source 7 is offset by 0.566522 and 7.979380 pixels which is larger than
2 X fitted extent = 4.610299 x 4.610299, not incorporating fit results
[Sat Jul 14 19:29:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:29:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:29:57 2012] Assessing source extent using major
[Sat Jul 14 19:29:57 2012] Source does appear to be extended
[Sat Jul 14 19:29:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:29:55 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 23:29:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 23:29:55 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Sun Jul 15 23:29:55 2012] source mask rpix=2.9, npix_max = 46, mask sum = 43, frac = 0.920
[Sun Jul 15 23:29:55 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.70"
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jul 15 23:54:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src2.csv
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jul 15 23:54:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src2.csv
[Sun Jul 15 23:54:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jul 15 23:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jul 15 23:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jul 15 23:54:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 03:50:10 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.308743 pixels away
[Mon Jul 16 03:50:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 03:50:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 03:50:10 2012] Assessing source extent using major
[Mon Jul 16 03:50:10 2012] Source does appear to be extended
[Mon Jul 16 03:50:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:00:07 2012] XMMSAS src. selection expression = ellipse(35151.039429, 37786.748077, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 16 08:00:07 2012] Writing source region out to fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src7_src.reg
[Mon Jul 16 08:00:07 2012] Extracting stamp from image fullrun_mos1_xmm0057740301_pi300-10000_cl_sm2.00.img.gz, (367, 397) - (442, 472)
[Mon Jul 16 08:00:07 2012] XMMSAS bgd. selection expression = annulus(35151.039429, 37786.748077, 1087.500000, 2175.000000, X, Y) && !ellipse(33691.286000, 38494.344800, 2036.930459, 2036.930459, 0.000000, X, Y)
[Mon Jul 16 08:00:07 2012] Writing fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src7.gif
[Mon Jul 16 08:04:31 2012] Mean detx,y = (-6780.56, -15273.17) 
[Mon Jul 16 08:04:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 08:04:47 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 08:04:47 2012] Setting source spectrum file to fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 16 08:04:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jul 16 08:12:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 16 08:12:52 2012] rmf not generated due to insufficient counts
[Mon Jul 16 09:34:39 2012] Updating aperture counts using extracted products
[Mon Jul 16 09:34:39 2012] Error reading totcts from fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jul 16 09:34:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:34:39 2012] Using photon index=1.80, rate=0.0136, arf fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src7.arf
[Mon Jul 16 09:34:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:34:39 2012] Updating source flux to 5.3e-13
[Mon Jul 16 09:34:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting