[Sat Jul 14 07:29:38 2012] Detection parameters:
  Position = (259.9, 207.5) = 12 53 6.82 -29 32 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.4 +/- 9.7
  Background counts = 19.9
  Rate = 0.001 +/- 0.0002

[Sat Jul 14 07:29:39 2012] Off-axis axis estimate = 7.16'
[Sat Jul 14 14:28:21 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:28:21 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Sat Jul 14 14:28:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.765
[Sat Jul 14 14:28:21 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.01"
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src36.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src36.csv
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src36_1.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src36.csv
[Sat Jul 14 16:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sat Jul 14 16:41:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sat Jul 14 16:41:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sat Jul 14 16:41:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:29:57 2012] Source 51 is offset by 7.180672 and -6.608766 pixels which is larger than
2 X fitted extent = 1.363824 x 1.363824, not incorporating fit results
[Sat Jul 14 19:29:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:29:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:29:57 2012] Assessing source extent using major
[Sat Jul 14 19:29:57 2012] Source does appear to be extended
[Sat Jul 14 19:29:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:29:57 2012] Deleting source due to low Poisson probability 0.8