[Sat Jul 14 07:29:38 2012] Detection parameters:
  Position = (264.4, 382.3) = 12 53 5.30 -29 19 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.3 +/- 12.6
  Background counts = 18.7
  Rate = 0.002 +/- 0.0003

[Sat Jul 14 07:29:39 2012] Off-axis axis estimate = 6.56'
[Sat Jul 14 14:28:21 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:28:21 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Sat Jul 14 14:28:21 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.838
[Sat Jul 14 14:28:21 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.71"
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src17.csv
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src17.csv
[Sat Jul 14 16:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jul 14 16:41:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jul 14 16:41:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jul 14 16:41:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:29:57 2012] Source 27 is offset by -0.298970 and 1.543528 pixels which is larger than
2 X fitted extent = 1.089959 x 1.089959, not incorporating fit results
[Sat Jul 14 19:29:57 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 11.808080 pixels away
[Sat Jul 14 19:29:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:29:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:29:57 2012] Assessing source extent using major
[Sat Jul 14 19:29:57 2012] Source does appear to be extended
[Sat Jul 14 19:29:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 19:29:57 2012] Deleting source due to low Poisson probability 0.9