[Sat Jul 14 07:29:37 2012] Detection parameters:
  Position = (388.2, 443.0) = 12 52 24.14 -29 14 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204327.4 +/- 518.0
  Background counts = 18.8
  Rate = 3 +/- 0.008

[Sat Jul 14 07:29:39 2012] Off-axis axis estimate = 12.34'
[Sat Jul 14 14:28:21 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:28:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 14:28:21 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Sat Jul 14 14:28:21 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.910
[Sat Jul 14 14:28:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.60"
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 16:41:51 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 16:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 16:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 16:41:52 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 16:41:52 2012] Fit fullrun_mos1_xmm0057740301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 19:29:57 2012] Spatial fit model total counts = 205930.000000, observed total counts = 196656.000000
[Sat Jul 14 19:29:57 2012] Offset between fit and detection position for source 1 = 0.436592 pixels
[Sat Jul 14 19:29:57 2012] 208226.500000 total counts/ 48755.500000 bgd. counts: snr = 722.220664
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.436592 pixels
  Position = (387.8, 443.0) = 12 52 24.29 -29 14 55.8
  Extent = 8.8 (8.8-8.8)", rotation angle = 0
  Source counts = 159471.0 +/- 456.3
  Background counts = 48755.5
  Rate = 2 +/- 0.007
[Sat Jul 14 19:29:57 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 19:29:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 19:29:57 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 19:29:57 2012] Source does appear to be extended
[Sat Jul 14 19:29:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 23:29:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 23:29:55 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Sun Jul 15 23:29:55 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.185
[Sun Jul 15 23:29:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.77"
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 23:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 23:54:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 23:54:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 23:54:42 2012] fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 23:54:42 2012] Fit fullrun_mos1_xmm0057740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 16 03:50:10 2012] Spatial fit model total counts = 185580.000000, observed total counts = 188276.000000
[Mon Jul 16 03:50:10 2012] Offset between fit and detection position for source 1 = 0.031000 pixels
[Mon Jul 16 03:50:10 2012] 185741.000000 total counts/ 28900.000000 bgd. counts: snr = 922.594118
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031000 pixels
  Position = (387.8, 443.0) = 12 52 24.28 -29 14 55.7
  Extent = 8.5 (8.5-8.5)", rotation angle = 0
  Source counts = 156841.0 +/- 431.0
  Background counts = 28900.0
  Rate = 2 +/- 0.006
[Mon Jul 16 03:50:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 03:50:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 03:50:10 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 03:50:10 2012] Source does appear to be extended
[Mon Jul 16 03:50:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:00:07 2012] Counts = 156841.000000, rescaling region sizes by 3.000000
[Mon Jul 16 08:00:07 2012] XMMSAS src. selection expression = ellipse(33691.286000, 38494.344800, 1527.697844, 1527.697844, 0.000000, X, Y)
[Mon Jul 16 08:00:07 2012] Writing source region out to fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 16 08:00:07 2012] Extracting stamp from image fullrun_mos1_xmm0057740301_pi300-10000_cl_sm2.00.img.gz, (300, 355) - (476, 531)
[Mon Jul 16 08:00:07 2012] XMMSAS bgd. selection expression = annulus(33691.286000, 38494.344800, 7638.489220, 15276.978440, X, Y) && !ellipse(35151.039429, 37786.748077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35672.434082, 34678.802643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23945.198000, 25619.598000, 366.489611, 366.489611, 0.000000, X, Y) && !ellipse(22187.471252, 32226.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.617523, 29462.509064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25816.048000, 23661.004000, 1020.008029, 1020.008029, 0.000000, X, Y) && !ellipse(38941.133575, 34209.595245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36206.129486, 30759.798859, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 16 08:00:07 2012] Writing fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1.gif
[Mon Jul 16 08:00:22 2012] Mean detx,y = (-8011.71, -14579.80) 
[Mon Jul 16 08:00:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 16 08:04:25 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 16 08:04:25 2012] Setting source spectrum file to fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 08:04:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 16 09:34:39 2012] Updating aperture counts using extracted products
[Mon Jul 16 09:34:39 2012] Error reading totcts from fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 16 09:34:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:34:39 2012] Using photon index=1.80, rate=2.32, arf fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 09:34:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:34:39 2012] Updating source flux to 6.8e-11
[Mon Jul 16 09:35:34 2012] Reading fit data from xmm0057740301/analysis//spectral/fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 16 09:35:34 2012] Spectral fit parameter nH value = 9.31751e+20
[Mon Jul 16 09:35:34 2012] Spectral fit parameter PhoIndex value = 1.73965
[Mon Jul 16 09:35:34 2012] Failed to get F(0.3-8.0) from xmm0057740301/analysis//spectral/fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 16 09:35:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 16 09:35:34 2012] Using Nh = 9.3e+20, photon index=1.74, rate=2.32, arf fullrun_mos1_xmm0057740301_pi300-10000_pass1_cl_src1.arf
[Mon Jul 16 09:35:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 16 09:35:34 2012] Updating source flux to 7.8e-11