[Mon May 13 01:42:36 2013] Detection parameters:
  Position = (333.1, 346.0) = 8 4 39.35 -28 5 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.3 +/- 22.5
  Background counts = 43.6
  Rate = 0.009 +/- 0.0007

[Mon May 13 01:42:37 2013] Off-axis axis estimate = 4.27'
[Mon May 13 01:44:54 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 01:44:54 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Mon May 13 01:44:54 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Mon May 13 01:44:54 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 8.56"
[Mon May 13 02:30:49 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_src14.ximg exists
[Mon May 13 02:30:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_src14.csv
[Mon May 13 02:30:49 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon May 13 02:30:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_src14.csv
[Mon May 13 02:30:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 02:30:50 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon May 13 02:30:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon May 13 02:30:50 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon May 13 02:30:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon May 13 02:30:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:01:32 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.977970 pixels away
[Mon May 13 03:01:32 2013] Vigneting correction estimate = 1.000000
[Mon May 13 03:01:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 03:01:32 2013] Assessing source extent using major
[Mon May 13 03:01:32 2013] Source does appear to be extended
[Mon May 13 03:01:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 03:01:43 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Mon May 13 03:01:43 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Mon May 13 03:01:43 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Mon May 13 03:01:43 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 8.56"
[Mon May 13 03:43:58 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_src14.ximg exists
[Mon May 13 03:43:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_src14.csv
[Mon May 13 03:43:58 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon May 13 03:43:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_src14.csv
[Mon May 13 03:43:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:43:58 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon May 13 03:43:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon May 13 03:43:58 2013] fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon May 13 03:43:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon May 13 03:43:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 04:11:22 2013] Source 14 is offset by -6.083876 and -7.798290 pixels which is larger than
2 X fitted extent = 0.984087 x 0.984087, not incorporating fit results
[Mon May 13 04:11:22 2013] Vigneting correction estimate = 1.000000
[Mon May 13 04:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 04:11:22 2013] Assessing source extent using major
[Mon May 13 04:11:22 2013] Source does appear to be extended
[Mon May 13 04:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 04:11:33 2013] XMMSAS src. selection expression = ellipse(28933.884766, 30050.122803, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 04:11:33 2013] Writing source region out to fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14_src.reg
[Mon May 13 04:11:33 2013] Extracting stamp from image fullrun_pn_xmm0057570101_pi300-10000_cl_sm2.00.img.gz, (296, 308) - (371, 383)
[Mon May 13 04:11:33 2013] XMMSAS bgd. selection expression = annulus(28933.884766, 30050.122803, 1087.500000, 2175.000000, X, Y) && !ellipse(30494.828820, 30745.638000, 486.700014, 486.700014, 0.000000, X, Y) && !ellipse(26905.393880, 27824.884200, 437.474413, 437.474413, 0.000000, X, Y)
[Mon May 13 04:11:33 2013] Writing fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14.gif
[Mon May 13 04:19:18 2013] Mean detx,y = (2467.22, -2199.12) 
[Mon May 13 04:19:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 04:19:51 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 04:19:52 2013] Setting source spectrum file to fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 13 04:19:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 13 04:39:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 04:39:13 2013] rmf not generated due to insufficient counts
[Mon May 13 05:05:42 2013] Updating aperture counts using extracted products
[Mon May 13 05:05:42 2013] Total counts from fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 430.00
[Mon May 13 05:05:42 2013] Total counts from fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 1338.00
[Mon May 13 05:05:42 2013] Got source and background scale factors 1266474.000000, 8396360.000000
[Mon May 13 05:05:42 2013] User source parameters:
  Position = (333.1, 346.0) = 8 4 39.35 -28 5 59.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 228.2 +/- 21.8
  Background aperture counts = 201.8
  Rate = 0.008 +/- 0.0008

[Mon May 13 05:05:42 2013] Updating counts from extracted products
[Mon May 13 05:05:42 2013] Set source signif. to 228.18/14.21 = 16.06
[Mon May 13 05:05:47 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:05:47 2013] Using photon index=1.80, rate=0.00813, arf fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14.arf
[Mon May 13 05:05:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:05:47 2013] Updating source flux to 4.2e-14
[Mon May 13 05:05:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 05:06:00 2013] xmm0057570101/analysis//spectral/fullrun_pn_xmm0057570101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete