[Mon May 13 01:43:13 2013] Detection parameters:
  Position = (309.8, 320.2) = 8 4 47.01 -28 7 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.6 +/- 15.6
  Background counts = 25.1
  Rate = 0.004 +/- 0.0005

[Mon May 13 01:43:13 2013] Off-axis axis estimate = 1.78'
[Mon May 13 02:35:01 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon May 13 02:35:01 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Mon May 13 02:35:01 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Mon May 13 02:35:01 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.32"
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src6.csv
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src6.csv
[Mon May 13 03:01:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 13 03:01:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:01:36 2013] Source 5 is offset by -5.893612 and 5.977749 pixels which is larger than
2 X fitted extent = 0.841457 x 0.841457, not incorporating fit results
[Mon May 13 03:01:36 2013] Vigneting correction estimate = 1.000000
[Mon May 13 03:01:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 03:01:36 2013] Assessing source extent using major
[Mon May 13 03:01:36 2013] Source does appear to be extended
[Mon May 13 03:01:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 03:48:13 2013] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon May 13 03:48:13 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Mon May 13 03:48:13 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Mon May 13 03:48:13 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.32"
[Mon May 13 04:11:15 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src6.ximg exists
[Mon May 13 04:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src6.csv
[Mon May 13 04:11:15 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon May 13 04:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src6.csv
[Mon May 13 04:11:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 04:11:16 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon May 13 04:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 13 04:11:16 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 13 04:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 13 04:11:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 04:11:25 2013] Spatial fit model total counts = 302.542000, observed total counts = 229.000000
[Mon May 13 04:11:25 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 04:11:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 04:11:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 04:11:25 2013] Assessing source extent using major
[Mon May 13 04:11:25 2013] Source does appear to be extended
[Mon May 13 04:11:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 04:51:18 2013] XMMSAS src. selection expression = ellipse(26907.409760, 27812.910156, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 04:51:18 2013] Writing source region out to fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5_src.reg
[Mon May 13 04:51:18 2013] Extracting stamp from image fullrun_mos2_xmm0057570101_pi300-10000_cl_sm2.00.img.gz, (272, 283) - (347, 358)
[Mon May 13 04:51:18 2013] XMMSAS bgd. selection expression = annulus(26907.409760, 27812.910156, 1087.500000, 2175.000000, X, Y) && !ellipse(28916.240520, 30024.123200, 398.956011, 398.956011, 0.000000, X, Y) && !ellipse(24927.403076, 30051.593689, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 04:51:18 2013] Writing fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5.gif
[Mon May 13 04:52:33 2013] Mean detx,y = (21.48, 134.56) 
[Mon May 13 04:52:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 04:52:43 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 04:52:44 2013] Setting source spectrum file to fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 13 04:52:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May 13 05:03:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 05:03:17 2013] rmf not generated due to insufficient counts
[Mon May 13 05:05:49 2013] Updating aperture counts using extracted products
[Mon May 13 05:05:49 2013] Total counts from fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 197.00
[Mon May 13 05:05:49 2013] Total counts from fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 629.00
[Mon May 13 05:05:49 2013] Got source and background scale factors 1184428.000000, 10651772.000000
[Mon May 13 05:05:49 2013] User source parameters:
  Position = (309.8, 320.2) = 8 4 47.01 -28 7 50.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 127.1 +/- 15.1
  Background aperture counts = 69.9
  Rate = 0.005 +/- 0.0006

[Mon May 13 05:05:49 2013] Updating counts from extracted products
[Mon May 13 05:05:49 2013] Set source signif. to 127.06/8.36 = 15.19
[Mon May 13 05:05:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:05:52 2013] Using photon index=1.80, rate=0.00472, arf fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5.arf
[Mon May 13 05:05:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:05:52 2013] Updating source flux to 6.9e-14
[Mon May 13 05:05:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 05:05:56 2013] xmm0057570101/analysis//spectral/fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete