[Mon May 13 01:43:13 2013] Detection parameters:
  Position = (323.6, 253.7) = 8 4 42.48 -28 12 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.3 +/- 16.6
  Background counts = 24.9
  Rate = 0.007 +/- 0.0007

[Mon May 13 01:43:13 2013] Off-axis axis estimate = 3.72'
[Mon May 13 02:35:01 2013] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Mon May 13 02:35:01 2013] Initial guess for spatial extent in simple fitting = 8.29"
[Mon May 13 02:35:01 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.951
[Mon May 13 02:35:01 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.29"
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src4.csv
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src4.csv
[Mon May 13 03:01:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 03:01:27 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 13 03:01:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 03:01:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057570101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 03:01:36 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.084423 pixels away
[Mon May 13 03:01:36 2013] Vigneting correction estimate = 1.000000
[Mon May 13 03:01:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 03:01:36 2013] Assessing source extent using major
[Mon May 13 03:01:36 2013] Source does appear to be extended
[Mon May 13 03:01:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 03:48:13 2013] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Mon May 13 03:48:13 2013] Initial guess for spatial extent in simple fitting = 8.29"
[Mon May 13 03:48:13 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.951
[Mon May 13 03:48:13 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.29"
[Mon May 13 04:11:15 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 13 04:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src4.csv
[Mon May 13 04:11:15 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 13 04:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src4.csv
[Mon May 13 04:11:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 04:11:16 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 13 04:11:16 2013] fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 13 04:11:16 2013] Fit fullrun_mos2_xmm0057570101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon May 13 04:11:25 2013] Spatial fit model total counts = 208.595000, observed total counts = 226.000000
[Mon May 13 04:11:25 2013] Offset between fit and detection position for source 11 = 0.510241 pixels
[Mon May 13 04:11:25 2013] 210.418500 total counts/ 152.893000 bgd. counts: snr = 4.652288
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.510241 pixels
  Position = (323.1, 253.7) = 8 4 42.65 -28 12 40.5
  Extent = 3.5 (2.8-4.7)", rotation angle = 0
  Source counts = 57.5 +/- 14.5
  Background counts = 152.9
  Rate = 0.002 +/- 0.0005
[Mon May 13 04:11:25 2013] Vigneting correction estimate = 1.000000
[Mon May 13 04:11:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 04:11:25 2013] Assessing source extent using major axis lower bound
[Mon May 13 04:11:25 2013] Source does appear to be extended
[Mon May 13 04:11:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 04:51:18 2013] XMMSAS src. selection expression = ellipse(28059.140220, 22024.197400, 211.951806, 211.951806, 0.000000, X, Y)
[Mon May 13 04:51:18 2013] Writing source region out to fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11_src.reg
[Mon May 13 04:51:18 2013] Extracting stamp from image fullrun_mos2_xmm0057570101_pi300-10000_cl_sm2.00.img.gz, (311, 242) - (335, 266)
[Mon May 13 04:51:18 2013] XMMSAS bgd. selection expression = annulus(28059.140220, 22024.197400, 353.253010, 706.506020, X, Y)
[Mon May 13 04:51:18 2013] Writing fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11.gif
[Mon May 13 04:52:02 2013] Mean detx,y = (-425.70, -5768.28) 
[Mon May 13 04:52:03 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 04:52:10 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 04:52:10 2013] Setting source spectrum file to fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 13 04:52:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 13 05:03:06 2013] Not generating rmf since there are only 57 counts
[Mon May 13 05:03:06 2013] rmf not generated due to insufficient counts
[Mon May 13 05:05:49 2013] Updating aperture counts using extracted products
[Mon May 13 05:05:49 2013] Total counts from fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 86.00
[Mon May 13 05:05:49 2013] Total counts from fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 86.00
[Mon May 13 05:05:49 2013] Got source and background scale factors 126764.000000, 1112852.000000
[Mon May 13 05:05:49 2013] User source parameters:
  Position = (323.1, 253.7) = 8 4 42.65 -28 12 40.5
  Extent = 3.5 (2.8-4.7)", rotation angle = 0
  Source aperture counts = 76.2 +/- 10.3
  Background aperture counts = 9.8
  Rate = 0.003 +/- 0.0004

[Mon May 13 05:05:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 05:05:52 2013] Using photon index=1.80, rate=0.00214, arf fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11.arf
[Mon May 13 05:05:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 05:05:52 2013] Updating source flux to 5.6e-14
[Mon May 13 05:05:54 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 05:05:56 2013] xmm0057570101/analysis//spectral/fullrun_mos2_xmm0057570101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete