[Thu May 31 10:20:16 2012] Detection parameters:
  Position = (319.7, 315.9) = 14 49 24.53 8 59 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 262.7 +/- 20.0
  Background counts = 16.8
  Rate = 0.007 +/- 0.0005

[Thu May 31 10:20:17 2012] Off-axis axis estimate = 1.99'
[Thu May 31 12:54:58 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:54:58 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Thu May 31 12:54:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.027
[Thu May 31 12:54:58 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.43"
[Thu May 31 13:40:46 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 31 13:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_src3.csv
[Thu May 31 13:40:46 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 31 13:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_src3.csv
[Thu May 31 13:40:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:40:46 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 31 13:40:46 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 31 13:40:46 2012] Fit fullrun_mos2_xmm0057560301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 31 13:41:09 2012] Spatial fit model total counts = 407.999000, observed total counts = 380.000000
[Thu May 31 13:41:09 2012] Offset between fit and detection position for source 4 = 0.060296 pixels
[Thu May 31 13:41:09 2012] 401.362000 total counts/ 239.196000 bgd. counts: snr = 10.485348
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.060296 pixels
  Position = (319.6, 315.9) = 14 49 24.55 8 59 37.3
  Extent = 4.1 (3.6-4.7)", rotation angle = 0
  Source counts = 162.2 +/- 20.0
  Background counts = 239.2
  Rate = 0.004 +/- 0.0005
[Thu May 31 13:41:09 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:41:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:41:09 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:41:09 2012] Source does appear to be extended
[Thu May 31 13:41:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 15:54:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 15:54:05 2012] Initial guess for spatial extent in simple fitting = 4.13"
[Thu May 31 15:54:05 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.070
[Thu May 31 15:54:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.13"
[Thu May 31 16:40:52 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 31 16:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_src3.csv
[Thu May 31 16:40:52 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 31 16:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_src3.csv
[Thu May 31 16:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 16:40:52 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 31 16:40:52 2012] fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 31 16:40:52 2012] Fit fullrun_mos2_xmm0057560301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 31 16:41:16 2012] Spatial fit model total counts = 407.990000, observed total counts = 380.000000
[Thu May 31 16:41:16 2012] Offset between fit and detection position for source 4 = 0.000103 pixels
[Thu May 31 16:41:16 2012] 401.357000 total counts/ 239.134000 bgd. counts: snr = 10.490393
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000103 pixels
  Position = (319.6, 315.9) = 14 49 24.55 8 59 37.3
  Extent = 4.1 (3.6-4.7)", rotation angle = 0
  Source counts = 162.2 +/- 20.0
  Background counts = 239.1
  Rate = 0.004 +/- 0.0005
[Thu May 31 16:41:17 2012] Vigneting correction estimate = 1.000000
[Thu May 31 16:41:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 16:41:17 2012] Assessing source extent using major axis lower bound
[Thu May 31 16:41:17 2012] Source does appear to be extended
[Thu May 31 16:41:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:26:29 2012] XMMSAS src. selection expression = ellipse(27756.978600, 27435.965400, 248.143207, 248.143207, 0.000000, X, Y)
[Thu May 31 18:26:29 2012] Writing source region out to fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4_src.reg
[Thu May 31 18:26:29 2012] Extracting stamp from image fullrun_mos2_xmm0057560301_pi300-10000_cl_sm2.00.img.gz, (305, 302) - (334, 330)
[Thu May 31 18:26:29 2012] XMMSAS bgd. selection expression = annulus(27756.978600, 27435.965400, 413.572012, 827.144024, X, Y) && !ellipse(27358.686180, 25899.705400, 983.872028, 391.084811, 326.191700, X, Y) && !ellipse(28283.830048, 25880.338226, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 18:26:29 2012] Writing fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4.gif
[Thu May 31 18:27:09 2012] Mean detx,y = (-1004.16, -690.89) 
[Thu May 31 18:27:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 18:27:17 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 18:27:17 2012] Setting source spectrum file to fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 18:27:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 31 18:53:45 2012] Updating aperture counts using extracted products
[Thu May 31 18:53:45 2012] Error reading totcts from fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 18:53:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 18:53:45 2012] Using photon index=1.80, rate=0.00412, arf fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4.arf
[Thu May 31 18:53:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 18:53:45 2012] Updating source flux to 5e-14
[Thu May 31 18:54:37 2012] Reading fit data from xmm0057560301/analysis//spectral/fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4_pl.csv
[Thu May 31 18:54:37 2012] Spectral fit parameter nH value = 5669080000.0
[Thu May 31 18:54:37 2012] Spectral fit parameter PhoIndex value = 1.75063
[Thu May 31 18:54:37 2012] Failed to get F(0.3-8.0) from xmm0057560301/analysis//spectral/fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Thu May 31 18:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 18:54:37 2012] Using Nh = 5.7e+09, photon index=1.75, rate=0.00412, arf fullrun_mos2_xmm0057560301_pi300-10000_pass1_cl_src4.arf
[Thu May 31 18:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 18:54:37 2012] Updating source flux to 5.1e-14