[Mon May 6 01:50:15 2013] Detection parameters: Position = (186.0, 307.0) = 23 3 26.18 58 54 6.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 101.0 +/- 19.7 Background counts = 111.1 Rate = 0.01 +/- 0.002 [Mon May 6 01:50:18 2013] Off-axis axis estimate = 8.17' [Mon May 6 01:51:05 2013] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 10.52" [Mon May 6 01:51:05 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057 [Mon May 6 01:51:05 2013] Giving source the simple spatial ID 77 for pass 0, mean size = 10.52" [Mon May 6 01:51:08 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src77.ximg exists [Mon May 6 01:51:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src77.csv [Mon May 6 01:51:08 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src77_1.ximg exists [Mon May 6 01:51:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src77.csv [Mon May 6 01:51:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src77_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:51:11 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src77.ximg exists [Mon May 6 01:51:11 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists [Mon May 6 01:51:11 2013] Fit fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly [Mon May 6 01:51:40 2013] Source 80 is offset by -9.631146 and 0.587248 pixels which is larger than 2 X fitted extent = 1.249412 x 1.249412, not incorporating fit results [Mon May 6 01:51:40 2013] Source 80 is offset by -4.757882 and 8.215283 pixels which is larger than 2 X fitted extent = 1.232593 x 1.232593, not incorporating fit results [Mon May 6 01:51:40 2013] Source 80 is offset by -6.735859 and 3.250179 pixels which is larger than 2 X fitted extent = 1.219949 x 1.219949, not incorporating fit results [Mon May 6 01:51:40 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:51:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:51:40 2013] Assessing source extent using major [Mon May 6 01:51:40 2013] Source does appear to be extended [Mon May 6 01:51:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:51:40 2013] Source is confused with source 68 [Mon May 6 01:51:40 2013] Source is confused with source 82 [Mon May 6 01:52:14 2013] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:52:14 2013] Initial guess for spatial extent in simple fitting = 10.52" [Mon May 6 01:52:14 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057 [Mon May 6 01:52:14 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 10.52" [Mon May 6 01:52:16 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src53.ximg exists [Mon May 6 01:52:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src53.csv [Mon May 6 01:52:16 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src53_1.ximg exists [Mon May 6 01:52:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src53.csv [Mon May 6 01:52:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:52:18 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src53.ximg exists [Mon May 6 01:52:18 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists [Mon May 6 01:52:18 2013] Fit fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly [Mon May 6 01:52:46 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 80 at 12.975501 pixels away [Mon May 6 01:52:46 2013] Source 80 is offset by -3.220916 and 8.202685 pixels which is larger than 2 X fitted extent = 1.306326 x 1.306326, not incorporating fit results [Mon May 6 01:52:46 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:52:46 2013] Assessing source extent using major [Mon May 6 01:52:46 2013] Source does appear to be extended [Mon May 6 01:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:53:12 2013] XMMSAS src. selection expression = ellipse(16135.564285, 26661.349609, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 01:53:12 2013] Not overwriting source region fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_src.reg [Mon May 6 01:53:12 2013] Extracting stamp from image fullrun_pn_xmm0057540301_pi300-10000_cl_sm2.00.img.gz, (149, 270) - (224, 345) [Mon May 6 01:53:12 2013] XMMSAS bgd. selection expression = annulus(16135.564285, 26661.349609, 1087.500000, 2175.000000, X, Y) && !ellipse(16474.385849, 29225.125549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15884.183456, 29266.042206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16318.400223, 28655.430603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15649.146988, 28032.651001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15313.386000, 27369.640000, 1711.880049, 1711.880049, 0.000000, X, Y) && !ellipse(15740.798599, 26480.507599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15475.990000, 25486.598000, 1700.344049, 1700.344049, 0.000000, X, Y) && !ellipse(15887.842087, 24924.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15430.515945, 25025.864838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15904.114761, 24387.720581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16150.984000, 24028.252000, 1703.720049, 1703.720049, 0.000000, X, Y) && !ellipse(16577.782000, 23209.148000, 1682.704048, 1682.704048, 25.500000, X, Y) && !ellipse(19406.515244, 24189.145630, 1740.000000, 1740.000000, 0.000000, X, Y) [Mon May 6 01:53:12 2013] Writing fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80.gif [Mon May 6 01:53:17 2013] ../../xmm0057540301/products/events/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_src.evt and ../../xmm0057540301/products/events/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_bgd.evt exist, delete to re-create [Mon May 6 01:53:18 2013] Mean detx,y = (7012.94, -4125.95) [Mon May 6 01:53:18 2013] ../../xmm0057540301/products/images/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_src.img and ../../xmm0057540301/products/images/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_bgd.img exist, delete to re-create [Mon May 6 01:53:18 2013] ../../xmm0057540301/products/spectra/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_src_b10.pi.gz and ../../xmm0057540301/products/spectra/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_bgd.pi exist, delete to re-create [Mon May 6 01:53:18 2013] Setting source spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_src_b10.pi.gz [Mon May 6 01:53:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_bgd.pi.gz [Mon May 6 01:53:18 2013] ../../xmm0057540301/products/lightcurves/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_src.lc and ../../xmm0057540301/products/lightcurves/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_bgd.lc exist, delete to re-create [Mon May 6 03:36:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 03:36:52 2013] rmf not generated due to insufficient counts [Mon May 6 04:24:30 2013] Updating aperture counts using extracted products [Mon May 6 04:24:30 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_src_b10.pi.gz = 1035.00 [Mon May 6 04:24:30 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_bgd.pi.gz = 2201.00 [Mon May 6 04:24:30 2013] Got source and background scale factors 1339200.000000, 3179200.000000 [Mon May 6 04:24:30 2013] User source parameters: Position = (186.0, 307.0) = 23 3 26.18 58 54 6.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 107.9 +/- 33.2 Background aperture counts = 927.1 Rate = 0.009 +/- 0.003 [Mon May 6 04:24:30 2013] Updating counts from extracted products [Mon May 6 04:24:30 2013] Set source signif. to 107.86/30.45 = 3.54 [Mon May 6 04:24:43 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 04:24:43 2013] Using photon index=1.80, rate=0.00898, arf fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80.arf [Mon May 6 04:24:43 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 04:24:43 2013] Updating source flux to 6.6e-14 [Mon May 6 04:25:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 04:25:34 2013] xmm0057540301/analysis//spectral/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete