[Mon May  6 01:50:11 2013] Detection parameters:
  Position = (288.4, 465.2) = 23 2 28.71 59 5 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.8 +/- 14.8
  Background counts = 86.3
  Rate = 0.005 +/- 0.001

[Mon May  6 01:50:18 2013] Off-axis axis estimate = 12.11'
[Mon May  6 01:51:05 2013] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 12.48"
[Mon May  6 01:51:05 2013] source mask rpix=2.9, npix_max = 45, mask sum = 28, frac = 0.616
[Mon May  6 01:51:05 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 12.48"
[Mon May  6 01:51:06 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src7.ximg exists
[Mon May  6 01:51:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src7.csv
[Mon May  6 01:51:06 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon May  6 01:51:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src7.csv
[Mon May  6 01:51:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon May  6 01:51:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon May  6 01:51:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May  6 01:51:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:40 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.805749 pixels away
[Mon May  6 01:51:40 2013] Source 8 is offset by -0.309148 and -7.590123 pixels which is larger than
2 X fitted extent = 1.280943 x 1.280943, not incorporating fit results
[Mon May  6 01:51:40 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.629547 pixels away
[Mon May  6 01:51:40 2013] Spatial fit model total counts = -103.840000, observed total counts = 1157.000000
[Mon May  6 01:51:40 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 01:51:40 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:51:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:51:40 2013] Assessing source extent using major
[Mon May  6 01:51:40 2013] Source does appear to be extended
[Mon May  6 01:51:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 01:51:40 2013] Deleting source due to low Poisson probability 0.9