[Mon May 6 01:50:14 2013] Detection parameters: Position = (176.9, 314.0) = 23 3 31.33 58 54 39.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 126.3 +/- 19.6 Background counts = 89.0 Rate = 0.02 +/- 0.002 [Mon May 6 01:50:18 2013] Off-axis axis estimate = 8.88' [Mon May 6 01:51:05 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 10.87" [Mon May 6 01:51:05 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001 [Mon May 6 01:51:05 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 10.87" [Mon May 6 01:51:08 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src65.ximg exists [Mon May 6 01:51:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src65.csv [Mon May 6 01:51:08 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src65_1.ximg exists [Mon May 6 01:51:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src65.csv [Mon May 6 01:51:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src65_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:51:10 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src65.ximg exists [Mon May 6 01:51:10 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists [Mon May 6 01:51:10 2013] Fit fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly [Mon May 6 01:51:40 2013] Warning, spatial fit 65 centroid is now closest to src. 61 [Mon May 6 01:51:40 2013] Spatial fit model total counts = 1411.400000, observed total counts = 1406.000000 [Mon May 6 01:51:40 2013] Offset between fit and detection position for source 68 = 1.205759 pixels [Mon May 6 01:51:40 2013] Warning, changing simple spatial fit ID from 65 to 70 [Mon May 6 01:51:40 2013] 1313.900000 total counts/ 874.704000 bgd. counts: snr = 14.850047 Spatial fit parameters: Offset between fit and detection position for source 68 = 1.205759 pixels Position = (176.6, 315.2) = 23 3 31.51 58 54 41.3 Extent = 21.4 (21.4-21.4)", rotation angle = 0 Source counts = 439.2 +/- 36.2 Background counts = 874.7 Rate = 0.04 +/- 0.003 [Mon May 6 01:51:40 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:51:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:51:40 2013] Assessing source extent using major axis lower bound [Mon May 6 01:51:40 2013] Source does appear to be extended [Mon May 6 01:51:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:51:40 2013] Source is confused with source 61 [Mon May 6 01:52:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 01:52:14 2013] Initial guess for spatial extent in simple fitting = 21.40" [Mon May 6 01:52:14 2013] source mask rpix=4.9, npix_max = 117, mask sum = 99, frac = 0.843 [Mon May 6 01:52:14 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 21.40" [Mon May 6 01:52:15 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src43.ximg exists [Mon May 6 01:52:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src43.csv [Mon May 6 01:52:15 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src43_1.ximg exists [Mon May 6 01:52:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src43.csv [Mon May 6 01:52:15 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src43_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:52:18 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists [Mon May 6 01:52:18 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists [Mon May 6 01:52:18 2013] Fit fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly [Mon May 6 01:52:46 2013] Warning, spatial fit 43 centroid is now closest to src. 49 [Mon May 6 01:52:46 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:52:46 2013] Assessing source extent using major axis lower bound [Mon May 6 01:52:46 2013] Source does appear to be extended [Mon May 6 01:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:53:12 2013] XMMSAS src. selection expression = ellipse(15313.386000, 27369.640000, 1283.910037, 1283.910037, 0.000000, X, Y) [Mon May 6 01:53:12 2013] Not overwriting source region fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_src.reg [Mon May 6 01:53:12 2013] Extracting stamp from image fullrun_pn_xmm0057540301_pi300-10000_cl_sm2.00.img.gz, (103, 241) - (250, 389) [Mon May 6 01:53:12 2013] XMMSAS bgd. selection expression = annulus(15313.386000, 27369.640000, 2139.850062, 4279.700123, X, Y) && !ellipse(16474.385849, 29225.125549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15884.183456, 29266.042206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16318.400223, 28655.430603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15649.146988, 28032.651001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16135.564285, 26661.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15740.798599, 26480.507599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15475.990000, 25486.598000, 1700.344049, 1700.344049, 0.000000, X, Y) && !ellipse(15887.842087, 24924.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15430.515945, 25025.864838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15904.114761, 24387.720581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16150.984000, 24028.252000, 1703.720049, 1703.720049, 0.000000, X, Y) && !ellipse(16482.646973, 23540.667999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16577.782000, 23209.148000, 1682.704048, 1682.704048, 25.500000, X, Y) && !ellipse(17131.403381, 22574.157684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19406.515244, 24189.145630, 1740.000000, 1740.000000, 0.000000, X, Y) [Mon May 6 01:53:12 2013] Writing fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68.gif [Mon May 6 01:53:17 2013] ../../xmm0057540301/products/events/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0057540301/products/events/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create [Mon May 6 01:53:17 2013] Mean detx,y = (7791.48, -3949.13) [Mon May 6 01:53:17 2013] ../../xmm0057540301/products/images/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_src.img and ../../xmm0057540301/products/images/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create [Mon May 6 01:53:17 2013] ../../xmm0057540301/products/spectra/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_src_b10.pi.gz and ../../xmm0057540301/products/spectra/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create [Mon May 6 01:53:17 2013] Setting source spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_src_b10.pi.gz [Mon May 6 01:53:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_bgd.pi.gz [Mon May 6 01:53:17 2013] ../../xmm0057540301/products/lightcurves/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0057540301/products/lightcurves/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create [Mon May 6 04:24:28 2013] Updating aperture counts using extracted products [Mon May 6 04:24:28 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 2482.00 [Mon May 6 04:24:28 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_bgd.pi.gz = 9402.00 [Mon May 6 04:24:28 2013] Got source and background scale factors 4748199.000000, 29909940.000000 [Mon May 6 04:24:28 2013] User source parameters: Position = (176.6, 315.2) = 23 3 31.51 58 54 41.3 Extent = 21.4 (21.4-21.4)", rotation angle = 0 Source aperture counts = 989.4 +/- 50.8 Background aperture counts = 1492.6 Rate = 0.08 +/- 0.004 [Mon May 6 04:24:43 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 04:24:43 2013] Using photon index=1.80, rate=0.0366, arf fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68.arf [Mon May 6 04:24:43 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 04:24:43 2013] Updating source flux to 2.7e-13 [Mon May 6 04:25:12 2013] Flag c found in src. 68 procflags, skipping spectral fitting [Mon May 6 04:25:34 2013] xmm0057540301/analysis//spectral/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete