[Mon May 6 01:50:12 2013] Detection parameters: Position = (323.4, 391.1) = 23 2 9.01 59 0 13.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 128.0 +/- 21.1 Background counts = 123.8 Rate = 0.02 +/- 0.003 [Mon May 6 01:50:18 2013] Off-axis axis estimate = 6.96' [Mon May 6 01:51:05 2013] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 9.91" [Mon May 6 01:51:05 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.972 [Mon May 6 01:51:05 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.91" [Mon May 6 01:51:07 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src33.ximg exists [Mon May 6 01:51:07 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src33_1.ximg exists [Mon May 6 01:51:07 2013] Fit fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src33 appears to have run properly [Mon May 6 01:51:10 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists [Mon May 6 01:51:10 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists [Mon May 6 01:51:10 2013] Fit fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly [Mon May 6 01:51:40 2013] Spatial fit model total counts = 1623.340000, observed total counts = 1532.000000 [Mon May 6 01:51:40 2013] Offset between fit and detection position for source 34 = 1.895941 pixels [Mon May 6 01:51:40 2013] 1580.380000 total counts/ 1475.150000 bgd. counts: snr = 2.739817 Spatial fit parameters: Offset between fit and detection position for source 34 = 1.895941 pixels Position = (323.3, 393.0) = 23 2 9.05 59 0 20.9 Extent = 14.5 (6.7-19.8)", rotation angle = 0 Source counts = 105.2 +/- 39.8 Background counts = 1475.2 Rate = 0.009 +/- 0.003 [Mon May 6 01:51:40 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:51:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:51:40 2013] Assessing source extent using major axis lower bound [Mon May 6 01:51:40 2013] Source does appear to be extended [Mon May 6 01:51:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:51:40 2013] Source is confused with source 25 [Mon May 6 01:52:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 01:52:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 01:52:14 2013] Initial guess for spatial extent in simple fitting = 14.46" [Mon May 6 01:52:14 2013] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.958 [Mon May 6 01:52:14 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 14.46" [Mon May 6 01:52:15 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src22.ximg exists [Mon May 6 01:52:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src22.csv [Mon May 6 01:52:15 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src22_1.ximg exists [Mon May 6 01:52:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src22.csv [Mon May 6 01:52:15 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:52:17 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists [Mon May 6 01:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src22.csv [Mon May 6 01:52:17 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists [Mon May 6 01:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src22.csv [Mon May 6 01:52:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:52:46 2013] Warning, spatial fit 22 centroid is now closest to src. 25 [Mon May 6 01:52:46 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:52:46 2013] Assessing source extent using major axis lower bound [Mon May 6 01:52:46 2013] Source does appear to be extended [Mon May 6 01:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:53:11 2013] XMMSAS src. selection expression = ellipse(28081.583000, 34140.144600, 867.330025, 867.330025, 0.000000, X, Y) [Mon May 6 01:53:11 2013] Not overwriting source region fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_src.reg [Mon May 6 01:53:11 2013] Extracting stamp from image fullrun_pn_xmm0057540301_pi300-10000_cl_sm2.00.img.gz, (273, 343) - (373, 443) [Mon May 6 01:53:11 2013] XMMSAS bgd. selection expression = annulus(28081.583000, 34140.144600, 1445.550042, 2891.100083, X, Y) && !ellipse(24724.386000, 37708.887400, 1815.576052, 1815.576052, 0.000000, X, Y) && !ellipse(26064.249451, 37719.647522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25173.513672, 37697.228455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25069.152435, 36583.786163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.469391, 36138.665192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24919.915894, 35449.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.314270, 34470.767822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27495.830627, 33780.693848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27103.192129, 32693.803103, 1453.984042, 968.799985, 65.618366, X, Y) && !ellipse(26387.225800, 31888.321716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.712000, 31719.620000, 1431.376041, 1431.376041, 0.000000, X, Y) && !ellipse(25203.576569, 30916.307526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.632294, 30402.556702, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 01:53:11 2013] Writing fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34.gif [Mon May 6 01:53:16 2013] ../../xmm0057540301/products/events/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_src.evt and ../../xmm0057540301/products/events/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_bgd.evt exist, delete to re-create [Mon May 6 01:53:16 2013] Mean detx,y = (2377.32, 9164.30) [Mon May 6 01:53:16 2013] ../../xmm0057540301/products/images/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_src.img and ../../xmm0057540301/products/images/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_bgd.img exist, delete to re-create [Mon May 6 01:53:16 2013] ../../xmm0057540301/products/spectra/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_src_b10.pi.gz and ../../xmm0057540301/products/spectra/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_bgd.pi exist, delete to re-create [Mon May 6 01:53:16 2013] Setting source spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Mon May 6 01:53:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_bgd.pi.gz [Mon May 6 01:53:16 2013] ../../xmm0057540301/products/lightcurves/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_src.lc and ../../xmm0057540301/products/lightcurves/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_bgd.lc exist, delete to re-create [Mon May 6 04:24:24 2013] Updating aperture counts using extracted products [Mon May 6 04:24:24 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1715.00 [Mon May 6 04:24:24 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_bgd.pi.gz = 7364.00 [Mon May 6 04:24:24 2013] Got source and background scale factors 2181715.000000, 13501673.000000 [Mon May 6 04:24:24 2013] User source parameters: Position = (323.3, 393.0) = 23 2 9.05 59 0 20.9 Extent = 14.5 (6.7-19.8)", rotation angle = 0 Source aperture counts = 525.1 +/- 42.4 Background aperture counts = 1189.9 Rate = 0.04 +/- 0.004 [Mon May 6 04:24:42 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 04:24:42 2013] Using photon index=1.80, rate=0.00876, arf fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34.arf [Mon May 6 04:24:42 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 04:24:42 2013] Updating source flux to 7.2e-14 [Mon May 6 04:25:12 2013] Flag c found in src. 34 procflags, skipping spectral fitting [Mon May 6 04:25:34 2013] xmm0057540301/analysis//spectral/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete