[Mon May  6 01:50:11 2013] Detection parameters:
  Position = (423.5, 330.5) = 23 1 12.78 58 56 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.1 +/- 41.8
  Background counts = 71.4
  Rate = 0.02 +/- 0.003

[Mon May  6 01:50:18 2013] Off-axis axis estimate = 9.36'
[Mon May  6 01:51:05 2013] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 11.11"
[Mon May  6 01:51:05 2013] source mask rpix=2.6, npix_max = 37, mask sum = 22, frac = 0.590
[Mon May  6 01:51:05 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.11"
[Mon May  6 01:51:06 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  6 01:51:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src3.csv
[Mon May  6 01:51:06 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  6 01:51:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src3.csv
[Mon May  6 01:51:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  6 01:51:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  6 01:51:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May  6 01:51:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:40 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.506820 pixels away
[Mon May  6 01:51:40 2013] Source 3 is offset by -7.595088 and -3.591609 pixels which is larger than
2 X fitted extent = 1.261894 x 1.261894, not incorporating fit results
[Mon May  6 01:51:40 2013] Spatial fit model total counts = 1166.160000, observed total counts = 1074.000000
[Mon May  6 01:51:40 2013] Offset between fit and detection position for source 3 = 1.021618 pixels
[Mon May  6 01:51:40 2013] Warning, changing simple spatial fit ID from 3 to 60
[Mon May  6 01:51:40 2013] 1065.554810 total counts/ 1058.960000 bgd. counts: snr = 0.202657
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.021618 pixels
  Position = (422.5, 330.1) = 23 1 13.33 58 55 46.4
  Extent = 2.8" x 2.8", rotation angle = 0
  Source counts = 6.6 +/- 32.6
  Background counts = 1059.0
  Rate = 0.0005 +/- 0.003
  Deleting source due to low Poisson probability