[Mon May  6 01:50:12 2013] Detection parameters:
  Position = (230.9, 396.6) = 23 3 1.11 59 0 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.2 +/- 15.7
  Background counts = 115.5
  Rate = 0.006 +/- 0.001

[Mon May  6 01:50:18 2013] Off-axis axis estimate = 8.64'
[Mon May  6 01:51:05 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Mon May  6 01:51:05 2013] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.821
[Mon May  6 01:51:05 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 10.75"
[Mon May  6 01:51:07 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src25.ximg exists
[Mon May  6 01:51:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src25.csv
[Mon May  6 01:51:07 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon May  6 01:51:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src25.csv
[Mon May  6 01:51:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon May  6 01:51:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon May  6 01:51:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon May  6 01:51:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:40 2013] Source 26 is offset by 3.712692 and -0.558939 pixels which is larger than
2 X fitted extent = 1.541862 x 1.541862, not incorporating fit results
[Mon May  6 01:51:40 2013] Spatial fit model total counts = 1325.870000, observed total counts = 1124.000000
[Mon May  6 01:51:40 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 01:51:40 2013] Source 26 is offset by 2.857542 and -6.402803 pixels which is larger than
2 X fitted extent = 1.253333 x 1.253333, not incorporating fit results
[Mon May  6 01:51:40 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:51:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:51:40 2013] Assessing source extent using major
[Mon May  6 01:51:40 2013] Source does appear to be extended
[Mon May  6 01:51:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 01:51:40 2013] Deleting source due to low Poisson probability 0.9