[Mon May  6 01:50:17 2013] Detection parameters:
  Position = (282.9, 128.5) = 23 2 31.73 58 41 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.3 +/- 19.5
  Background counts = 94.2
  Rate = 0.007 +/- 0.001

[Mon May  6 01:50:18 2013] Off-axis axis estimate = 12.37'
[Mon May  6 01:51:05 2013] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 12.61"
[Mon May  6 01:51:05 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Mon May  6 01:51:05 2013] Giving source the simple spatial ID 133 for pass 0, mean size = 12.61"
[Mon May  6 01:51:40 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:51:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:51:40 2013] Assessing source extent using major
[Mon May  6 01:51:40 2013] Source does appear to be extended
[Mon May  6 01:51:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 01:52:14 2013] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:52:14 2013] Initial guess for spatial extent in simple fitting = 12.61"
[Mon May  6 01:52:14 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Mon May  6 01:52:14 2013] Giving source the simple spatial ID 95 for pass 1, mean size = 12.61"
[Mon May  6 01:52:17 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src95.ximg exists
[Mon May  6 01:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src95.csv
[Mon May  6 01:52:17 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src95_1.ximg exists
[Mon May  6 01:52:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src95.csv
[Mon May  6 01:52:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src95_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:52:19 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src95.ximg exists
[Mon May  6 01:52:19 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src95_1.ximg exists
[Mon May  6 01:52:19 2013] Fit fullrun_pn_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src95 appears to have run properly
[Mon May  6 01:52:46 2013] Warning, spatial fit 95 centroid is now closest to src. 41
[Mon May  6 01:52:46 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:52:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:52:46 2013] Assessing source extent using major
[Mon May  6 01:52:46 2013] Source does appear to be extended
[Mon May  6 01:52:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 01:53:14 2013] XMMSAS src. selection expression = ellipse(24565.421692, 11130.920349, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  6 01:53:14 2013] Not overwriting source region fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136_src.reg
[Mon May  6 01:53:14 2013] Extracting stamp from image fullrun_pn_xmm0057540301_pi300-10000_cl_sm2.00.img.gz, (245, 91) - (320, 166)
[Mon May  6 01:53:14 2013] XMMSAS bgd. selection expression = annulus(24565.421692, 11130.920349, 1087.500000, 2175.000000, X, Y) && !ellipse(25187.941101, 10137.956650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21890.153107, 13473.557571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23412.302643, 13075.990829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23066.344360, 12582.400970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21921.479797, 12705.416443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24909.194885, 11977.495026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.520386, 11869.387543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.399963, 11949.318527, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  6 01:53:14 2013] Writing fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136.gif
[Mon May  6 02:21:04 2013] Mean detx,y = (-9290.83, -10829.35) 
[Mon May  6 02:21:06 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 02:21:31 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 02:21:31 2013] Setting source spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136_src_b10.pi.gz
[Mon May  6 02:21:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136_bgd.pi.gz
[Mon May  6 04:19:57 2013] Not generating rmf since there are only 98 counts
[Mon May  6 04:19:57 2013] rmf not generated due to insufficient counts
[Mon May  6 04:24:38 2013] Updating aperture counts using extracted products
[Mon May  6 04:24:38 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136_src_b10.pi.gz = 728.00
[Mon May  6 04:24:38 2013] Total counts from fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136_bgd.pi.gz = 1834.00
[Mon May  6 04:24:38 2013] Got source and background scale factors 1336000.000000, 4578283.000000
[Mon May  6 04:24:38 2013] User source parameters:
  Position = (282.9, 128.5) = 23 2 31.73 58 41 9.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 192.8 +/- 28.0
  Background aperture counts = 535.2
  Rate = 0.02 +/- 0.002

[Mon May  6 04:24:38 2013] Updating counts from extracted products
[Mon May  6 04:24:38 2013] Set source signif. to 192.82/23.13 = 8.33
[Mon May  6 04:24:44 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 04:24:44 2013] Using photon index=1.80, rate=0.016, arf fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136.arf
[Mon May  6 04:24:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 04:24:44 2013] Updating source flux to 2.3e-13
[Mon May  6 04:25:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May  6 04:25:34 2013] xmm0057540301/analysis//spectral/fullrun_pn_xmm0057540301_pi300-10000_pass1_cl_src136_pl.csv not found, spectral fit skipped or did not complete