[Mon May  6 01:50:11 2013] Detection parameters:
  Position = (357.4, 439.8) = 23 1 49.82 59 3 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.5 +/- 14.2
  Background counts = 102.8
  Rate = 0.006 +/- 0.001

[Mon May  6 01:50:18 2013] Off-axis axis estimate = 11.11'
[Mon May  6 01:51:05 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:05 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Mon May  6 01:51:05 2013] source mask rpix=2.8, npix_max = 42, mask sum = 32, frac = 0.755
[Mon May  6 01:51:05 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 11.98"
[Mon May  6 01:51:06 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src12.ximg exists
[Mon May  6 01:51:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src12.csv
[Mon May  6 01:51:06 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon May  6 01:51:06 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src12.csv
[Mon May  6 01:51:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon May  6 01:51:09 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon May  6 01:51:09 2013] fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon May  6 01:51:09 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon May  6 01:51:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:40 2013] Source 13 is offset by -6.697930 and 4.626661 pixels which is larger than
2 X fitted extent = 1.416736 x 1.416736, not incorporating fit results
[Mon May  6 01:51:40 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:51:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:51:40 2013] Assessing source extent using major
[Mon May  6 01:51:40 2013] Source does appear to be extended
[Mon May  6 01:51:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 01:51:40 2013] Deleting source due to low Poisson probability 1.0