[Mon May 6 01:50:22 2013] Detection parameters: Position = (227.7, 253.7) = 23 3 2.74 58 50 18.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 69.2 +/- 16.0 Background counts = 73.9 Rate = 0.005 +/- 0.001 [Mon May 6 01:50:22 2013] Off-axis axis estimate = 6.07' [Mon May 6 01:51:13 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:51:13 2013] Initial guess for spatial extent in simple fitting = 9.46" [Mon May 6 01:51:13 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.873 [Mon May 6 01:51:13 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.46" [Mon May 6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src25.ximg exists [Mon May 6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src25.csv [Mon May 6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src25_1.ximg exists [Mon May 6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src25.csv [Mon May 6 01:51:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Mon May 6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Mon May 6 01:51:15 2013] Fit fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Mon May 6 01:51:57 2013] Spatial fit model total counts = 805.327000, observed total counts = 738.000000 [Mon May 6 01:51:57 2013] Offset between fit and detection position for source 42 = 0.415830 pixels [Mon May 6 01:51:57 2013] 810.132600 total counts/ 768.188000 bgd. counts: snr = 1.513360 Spatial fit parameters: Offset between fit and detection position for source 42 = 0.415830 pixels Position = (228.0, 253.9) = 23 3 2.52 58 50 15.5 Extent = 8.3 (2.4-18.9)", rotation angle = 0 Source counts = 41.9 +/- 28.5 Background counts = 768.2 Rate = 0.003 +/- 0.002 Deleting source due to low Poisson probability