[Mon May  6 01:50:22 2013] Detection parameters:
  Position = (190.6, 272.0) = 23 3 23.52 58 51 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.7 +/- 13.9
  Background counts = 52.1
  Rate = 0.005 +/- 0.001

[Mon May  6 01:50:22 2013] Off-axis axis estimate = 8.05'
[Mon May  6 01:51:13 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:13 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Mon May  6 01:51:13 2013] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.979
[Mon May  6 01:51:13 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 10.45"
[Mon May  6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src26.ximg exists
[Mon May  6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src26.csv
[Mon May  6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon May  6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src26.csv
[Mon May  6 01:51:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon May  6 01:51:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May  6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon May  6 01:51:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May  6 01:51:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:57 2013] Source 39 is offset by -6.251474 and 6.060522 pixels which is larger than
2 X fitted extent = 1.236280 x 1.236280, not incorporating fit results
[Mon May  6 01:51:57 2013] Spatial fit model total counts = 591.769000, observed total counts = 526.000000
[Mon May  6 01:51:57 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 01:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:51:58 2013] Assessing source extent using major
[Mon May  6 01:51:58 2013] Source does appear to be extended
[Mon May  6 01:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 01:51:58 2013] Deleting source due to low Poisson probability 0.9