[Mon May 6 01:50:21 2013] Detection parameters: Position = (286.7, 305.8) = 23 2 29.67 58 54 2.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 74.6 +/- 18.4 Background counts = 113.5 Rate = 0.004 +/- 0.001 [Mon May 6 01:50:22 2013] Off-axis axis estimate = 1.00' [Mon May 6 01:51:13 2013] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:51:13 2013] Initial guess for spatial extent in simple fitting = 6.93" [Mon May 6 01:51:13 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913 [Mon May 6 01:51:13 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 6.93" [Mon May 6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src34.ximg exists [Mon May 6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src34.csv [Mon May 6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src34_1.ximg exists [Mon May 6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src34.csv [Mon May 6 01:51:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src34_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists [Mon May 6 01:51:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src34.csv [Mon May 6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists [Mon May 6 01:51:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src34.csv [Mon May 6 01:51:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:51:57 2013] Source 35 is offset by 2.089695 and -0.625609 pixels which is larger than 2 X fitted extent = 1.162708 x 1.162708, not incorporating fit results [Mon May 6 01:51:58 2013] Spatial fit model total counts = 1364.720000, observed total counts = 1235.000000 [Mon May 6 01:51:58 2013] Poor agreement between spatial fit and data for source 35 It may help to tweak spatial fit manually Not incorporating fit results [Mon May 6 01:51:58 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:51:58 2013] Assessing source extent using major [Mon May 6 01:51:58 2013] Source does appear to be extended [Mon May 6 01:51:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:51:58 2013] Source is confused with source 34 [Mon May 6 01:52:21 2013] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:52:21 2013] Initial guess for spatial extent in simple fitting = 6.93" [Mon May 6 01:52:21 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913 [Mon May 6 01:52:21 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 6.93" [Mon May 6 01:52:22 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src19.ximg exists [Mon May 6 01:52:22 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src19_1.ximg exists [Mon May 6 01:52:22 2013] Fit fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src19 appears to have run properly [Mon May 6 01:52:22 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Mon May 6 01:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src19.csv [Mon May 6 01:52:22 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Mon May 6 01:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src19.csv [Mon May 6 01:52:22 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:52:56 2013] Source 35 is offset by 2.089695 and -0.627517 pixels which is larger than 2 X fitted extent = 1.201816 x 1.201816, not incorporating fit results [Mon May 6 01:52:56 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 27.844069 pixels away [Mon May 6 01:52:56 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:52:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:52:56 2013] Assessing source extent using major [Mon May 6 01:52:56 2013] Source does appear to be extended [Mon May 6 01:52:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 04:23:49 2013] XMMSAS src. selection expression = ellipse(24892.627502, 26553.412048, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 04:23:49 2013] Not overwriting source region fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_src.reg [Mon May 6 04:23:49 2013] Extracting stamp from image fullrun_mos2_xmm0057540301_pi300-10000_cl_sm2.00.img.gz, (249, 268) - (324, 343) [Mon May 6 04:23:49 2013] XMMSAS bgd. selection expression = annulus(24892.627502, 26553.412048, 1087.500000, 2175.000000, X, Y) && !ellipse(25476.335693, 28298.822998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25296.417633, 27060.546539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23821.814362, 27012.514404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23465.727142, 27897.363983, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 04:23:49 2013] Writing fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35.gif [Mon May 6 04:23:50 2013] ../../xmm0057540301/products/events/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0057540301/products/events/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create [Mon May 6 04:23:50 2013] Mean detx,y = (28.01, -1479.30) [Mon May 6 04:23:50 2013] ../../xmm0057540301/products/images/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_src.img and ../../xmm0057540301/products/images/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create [Mon May 6 04:23:50 2013] ../../xmm0057540301/products/spectra/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0057540301/products/spectra/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create [Mon May 6 04:23:50 2013] Setting source spectrum file to fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Mon May 6 04:23:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_bgd.pi.gz [Mon May 6 04:23:50 2013] ../../xmm0057540301/products/lightcurves/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0057540301/products/lightcurves/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create [Mon May 6 04:23:52 2013] Not generating rmf since there are only 74 counts [Mon May 6 04:23:52 2013] rmf not generated due to insufficient counts [Mon May 6 04:23:52 2013] fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35.arf exists, delete to re-create [Mon May 6 04:24:51 2013] Updating aperture counts using extracted products [Mon May 6 04:24:51 2013] Total counts from fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 870.00 [Mon May 6 04:24:51 2013] Total counts from fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 3841.00 [Mon May 6 04:24:52 2013] Got source and background scale factors 1238044.000000, 6838080.000000 [Mon May 6 04:24:52 2013] User source parameters: Position = (286.7, 305.8) = 23 2 29.67 58 54 2.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 174.6 +/- 30.5 Background aperture counts = 695.4 Rate = 0.01 +/- 0.002 [Mon May 6 04:24:52 2013] Updating counts from extracted products [Mon May 6 04:24:52 2013] Set source signif. to 174.58/26.37 = 6.62 [Mon May 6 04:24:52 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 04:24:52 2013] Using photon index=1.80, rate=0.0111, arf fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35.arf [Mon May 6 04:24:52 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 04:24:52 2013] Updating source flux to 1.7e-13 [Mon May 6 04:25:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 04:25:12 2013] xmm0057540301/analysis//spectral/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete