[Mon May  6 01:50:20 2013] Detection parameters:
  Position = (433.7, 308.8) = 23 1 7.13 58 54 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.7 +/- 19.9
  Background counts = 43.9
  Rate = 0.009 +/- 0.001

[Mon May  6 01:50:22 2013] Off-axis axis estimate = 9.83'
[Mon May  6 01:51:13 2013] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:13 2013] Initial guess for spatial extent in simple fitting = 11.35"
[Mon May  6 01:51:13 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Mon May  6 01:51:13 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.35"
[Mon May  6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src3.ximg exists
[Mon May  6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May  6 01:51:14 2013] Fit fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon May  6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May  6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May  6 01:51:15 2013] Fit fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May  6 01:51:57 2013] Source 3 is offset by 2.137452 and 5.692774 pixels which is larger than
2 X fitted extent = 4.207899 x 4.207899, not incorporating fit results
[Mon May  6 01:51:58 2013] Spatial fit model total counts = 990.706000, observed total counts = 991.000000
[Mon May  6 01:51:58 2013] Offset between fit and detection position for source 3 = 6.983799 pixels
[Mon May  6 01:51:58 2013] Warning, changing simple spatial fit ID from 3 to 40
[Mon May  6 01:51:58 2013] 890.318000 total counts/ 713.918000 bgd. counts: snr = 6.601983
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.983799 pixels
  Position = (433.1, 301.9) = 23 1 7.49 58 53 43.3
  Extent = 23.2 (23.1-46.5)", rotation angle = 94 (92-97) degrees
  Source counts = 176.4 +/- 29.8
  Background counts = 713.9
  Rate = 0.01 +/- 0.002
[Mon May  6 01:51:58 2013] Source 3 is offset by 3.798575 and -2.243632 pixels which is larger than
2 X fitted extent = 3.211370 x 3.211370, not incorporating fit results
[Mon May  6 01:51:58 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:51:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:51:58 2013] Assessing source extent using major axis lower bound
[Mon May  6 01:51:58 2013] Source does appear to be extended
[Mon May  6 01:51:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.02
[Mon May  6 01:51:58 2013] Source is asymmetric
[Mon May  6 01:51:58 2013] Source is confused with source 1
[Mon May  6 01:52:21 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 01:52:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  6 01:52:21 2013] Initial guess for spatial extent in simple fitting = 13.07"
[Mon May  6 01:52:21 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Mon May  6 01:52:21 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 13.07"
[Mon May  6 01:52:21 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src3.ximg exists
[Mon May  6 01:52:21 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src3.csv
[Mon May  6 01:52:21 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May  6 01:52:21 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src3.csv
[Mon May  6 01:52:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:52:22 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May  6 01:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May  6 01:52:22 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May  6 01:52:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May  6 01:52:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:52:56 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.938965 pixels away
[Mon May  6 01:52:56 2013] Vigneting correction estimate = 1.000000
[Mon May  6 01:52:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 01:52:56 2013] Assessing source extent using major axis lower bound
[Mon May  6 01:52:56 2013] Source does appear to be extended
[Mon May  6 01:52:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.02
[Mon May  6 01:52:56 2013] Source is asymmetric
[Mon May  6 04:23:49 2013] XMMSAS src. selection expression = ellipse(37628.814000, 26215.178000, 1393.740040, 174.217805, 94.206480, X, Y)
[Mon May  6 04:23:49 2013] Not overwriting source region fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_src.reg
[Mon May  6 04:23:49 2013] Extracting stamp from image fullrun_mos2_xmm0057540301_pi300-10000_cl_sm2.00.img.gz, (353, 222) - (513, 382)
[Mon May  6 04:23:49 2013] XMMSAS bgd. selection expression = annulus(37628.814000, 26215.178000, 2322.900067, 4645.800134, X, Y) && !ellipse(37464.932000, 25025.339000, 1647.708047, 1647.708047, 0.000000, X, Y) && !ellipse(36217.332000, 28749.690000, 1752.416050, 1752.416050, 0.000000, X, Y)
[Mon May  6 04:23:49 2013] Writing fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3.gif
[Mon May  6 04:23:49 2013] ../../xmm0057540301/products/events/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0057540301/products/events/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon May  6 04:23:49 2013] Mean detx,y = (10493.78, -8782.72) 
[Mon May  6 04:23:49 2013] ../../xmm0057540301/products/images/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_src.img and ../../xmm0057540301/products/images/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon May  6 04:23:49 2013] ../../xmm0057540301/products/spectra/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0057540301/products/spectra/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon May  6 04:23:49 2013] Setting source spectrum file to fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May  6 04:23:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May  6 04:23:49 2013] ../../xmm0057540301/products/lightcurves/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0057540301/products/lightcurves/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon May  6 04:23:52 2013] fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Mon May  6 04:23:52 2013] fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Mon May  6 04:24:49 2013] Updating aperture counts using extracted products
[Mon May  6 04:24:49 2013] Total counts from fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 3310.00
[Mon May  6 04:24:49 2013] Total counts from fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 6237.00
[Mon May  6 04:24:49 2013] Got source and background scale factors 761600.000000, 30151948.000000
[Mon May  6 04:24:49 2013] User source parameters:
  Position = (433.1, 301.9) = 23 1 7.49 58 53 43.3
  Extent = 23.2 (23.1-46.5)", rotation angle = 94 (92-97) degrees
  Source aperture counts = 3152.5 +/- 58.5
  Background aperture counts = 157.5
  Rate = 0.2 +/- 0.004

[Mon May  6 04:24:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 04:24:52 2013] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3.arf
[Mon May  6 04:24:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 04:24:52 2013] Updating source flux to 4.1e-13
[Mon May  6 04:25:05 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Mon May  6 04:25:05 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Mon May  6 04:25:12 2013] xmm0057540301/analysis//spectral/fullrun_mos2_xmm0057540301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete