[Mon May  6 01:50:21 2013] Detection parameters:
  Position = (188.2, 345.1) = 23 3 25.06 58 56 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.2 +/- 13.4
  Background counts = 45.6
  Rate = 0.005 +/- 0.001

[Mon May  6 01:50:22 2013] Off-axis axis estimate = 8.68'
[Mon May  6 01:51:13 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:51:13 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Mon May  6 01:51:13 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Mon May  6 01:51:13 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.77"
[Mon May  6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src29.ximg exists
[Mon May  6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src29.csv
[Mon May  6 01:51:14 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon May  6 01:51:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src29.csv
[Mon May  6 01:51:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon May  6 01:51:15 2013] fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon May  6 01:51:15 2013] Fit fullrun_mos2_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon May  6 01:51:57 2013] Source 25 is offset by -5.865566 and 2.703929 pixels which is larger than
2 X fitted extent = 1.260133 x 1.260133, not incorporating fit results
[Mon May  6 01:51:58 2013] Spatial fit model total counts = 486.500000, observed total counts = 463.000000
[Mon May  6 01:51:58 2013] Offset between fit and detection position for source 25 = 1.113642 pixels
[Mon May  6 01:51:58 2013] 487.942700 total counts/ 458.904000 bgd. counts: snr = 1.355552
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.113642 pixels
  Position = (187.1, 344.7) = 23 3 25.65 58 56 49.9
  Extent = 7.5 (2.8-20.0)", rotation angle = 0
  Source counts = 29.0 +/- 22.1
  Background counts = 458.9
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability