[Mon May 6 01:50:20 2013] Detection parameters: Position = (222.4, 365.5) = 23 3 5.83 58 58 21.8 Extent = 21.7" x 21.7", rotation angle = 0 degrees Source counts = 79.7 +/- 12.2 Background counts = 197.1 Rate = 0.008 +/- 0.001 [Mon May 6 01:50:20 2013] Off-axis axis estimate = 7.35' [Mon May 6 01:51:11 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:51:11 2013] Initial guess for spatial extent in simple fitting = 10.10" [Mon May 6 01:51:11 2013] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.502 [Mon May 6 01:51:11 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.10" [Mon May 6 01:51:12 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_src7.ximg exists [Mon May 6 01:51:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_src7.csv [Mon May 6 01:51:12 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_src7_1.ximg exists [Mon May 6 01:51:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_src7.csv [Mon May 6 01:51:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:51:13 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Mon May 6 01:51:13 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Mon May 6 01:51:13 2013] Fit fullrun_mos1_xmm0057540301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Mon May 6 01:51:49 2013] Warning, spatial fit 7 centroid is now closest to src. 39 [Mon May 6 01:51:49 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:51:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:51:49 2013] Assessing source extent using major [Mon May 6 01:51:49 2013] Source does appear to be extended [Mon May 6 01:51:49 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 01:51:49 2013] Source is confused with source 19 [Mon May 6 01:52:19 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting [Mon May 6 01:52:19 2013] Initial guess for spatial extent in simple fitting = 10.10" [Mon May 6 01:52:19 2013] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.502 [Mon May 6 01:52:19 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.10" [Mon May 6 01:52:20 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_src7.ximg exists [Mon May 6 01:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_src7.csv [Mon May 6 01:52:20 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_src7_1.ximg exists [Mon May 6 01:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_src7.csv [Mon May 6 01:52:20 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 01:52:20 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Mon May 6 01:52:20 2013] fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Mon May 6 01:52:20 2013] Fit fullrun_mos1_xmm0057540301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Mon May 6 01:52:52 2013] Warning, spatial fit 7 centroid is now closest to src. 19 [Mon May 6 01:52:52 2013] Vigneting correction estimate = 1.000000 [Mon May 6 01:52:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 01:52:52 2013] Assessing source extent using major [Mon May 6 01:52:52 2013] Source does appear to be extended [Mon May 6 01:52:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 04:23:45 2013] XMMSAS src. selection expression = ellipse(19303.590378, 31749.593781, 1305.000000, 1305.000000, 0.000000, X, Y) [Mon May 6 04:23:45 2013] Not overwriting source region fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_src.reg [Mon May 6 04:23:45 2013] Extracting stamp from image fullrun_mos1_xmm0057540301_pi300-10000_cl_sm2.00.img.gz, (147, 290) - (297, 440) [Mon May 6 04:23:45 2013] XMMSAS bgd. selection expression = annulus(19303.590378, 31749.593781, 2175.000000, 4350.000000, X, Y) && !ellipse(18761.015228, 34661.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19426.917816, 34344.545074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18487.514000, 32459.594000, 1687.032049, 1687.032049, 0.000000, X, Y) && !ellipse(19213.373810, 33487.506927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18719.499863, 33463.877167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17222.153610, 29970.357758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.154000, 26400.202000, 1101.544032, 1101.544032, 0.000000, X, Y) && !ellipse(24820.506200, 39498.442000, 3682.960106, 3682.960106, 0.000000, X, Y) && !ellipse(24609.804000, 28510.532000, 1182.496034, 403.409612, 55.309000, X, Y) [Mon May 6 04:23:45 2013] Writing fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40.gif [Mon May 6 04:23:45 2013] ../../xmm0057540301/products/events/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_src.evt and ../../xmm0057540301/products/events/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_bgd.evt exist, delete to re-create [Mon May 6 04:23:46 2013] Mean detx,y = (-1746.81, 7488.44) [Mon May 6 04:23:46 2013] ../../xmm0057540301/products/images/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_src.img and ../../xmm0057540301/products/images/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_bgd.img exist, delete to re-create [Mon May 6 04:23:46 2013] ../../xmm0057540301/products/spectra/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_src_b10.pi.gz and ../../xmm0057540301/products/spectra/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_bgd.pi exist, delete to re-create [Mon May 6 04:23:46 2013] Setting source spectrum file to fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Mon May 6 04:23:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_bgd.pi.gz [Mon May 6 04:23:46 2013] ../../xmm0057540301/products/lightcurves/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_src.lc and ../../xmm0057540301/products/lightcurves/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_bgd.lc exist, delete to re-create [Mon May 6 04:23:49 2013] Not generating rmf since there are only 79 counts [Mon May 6 04:23:49 2013] rmf not generated due to insufficient counts [Mon May 6 04:23:49 2013] fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40.arf exists, delete to re-create [Mon May 6 04:24:45 2013] Updating aperture counts using extracted products [Mon May 6 04:24:45 2013] Total counts from fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 1320.00 [Mon May 6 04:24:45 2013] Total counts from fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_bgd.pi.gz = 9785.00 [Mon May 6 04:24:45 2013] Got source and background scale factors 3988642.000000, 34383319.000000 [Mon May 6 04:24:45 2013] User source parameters: Position = (222.4, 365.5) = 23 3 5.83 58 58 21.8 Extent = 21.7" x 21.7", rotation angle = 0 Source aperture counts = 184.9 +/- 37.3 Background aperture counts = 1135.1 Rate = 0.01 +/- 0.002 [Mon May 6 04:24:45 2013] Updating counts from extracted products [Mon May 6 04:24:45 2013] Set source signif. to 184.89/33.69 = 5.49 [Mon May 6 04:24:48 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 04:24:48 2013] Using photon index=1.80, rate=0.0118, arf fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40.arf [Mon May 6 04:24:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 04:24:48 2013] Updating source flux to 2.2e-13 [Mon May 6 04:24:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 04:25:05 2013] xmm0057540301/analysis//spectral/fullrun_mos1_xmm0057540301_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete