[Sun Jun 10 10:21:51 2012] Detection parameters:
  Position = (401.5, 343.4) = 23 0 27.61 58 44 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.3 +/- 13.9
  Background counts = 53.7
  Rate = 0.009 +/- 0.002

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 8.15'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Sun Jun 10 10:27:28 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.883
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 10.50"
[Sun Jun 10 16:37:26 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src76.ximg exists
[Sun Jun 10 16:37:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src76.csv
[Sun Jun 10 16:37:26 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src76_1.ximg exists
[Sun Jun 10 16:37:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src76.csv
[Sun Jun 10 16:37:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:28 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Sun Jun 10 16:37:28 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Sun Jun 10 16:37:28 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly