[Sun Jun 10 10:21:51 2012] Detection parameters:
  Position = (353.8, 471.6) = 23 0 54.11 58 54 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.1 +/- 16.4
  Background counts = 66.5
  Rate = 0.006 +/- 0.001

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 13.18'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 13.02"
[Sun Jun 10 10:27:28 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 70 for pass 0, mean size = 13.02"
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src70.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src70.csv
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src70.csv
[Sun Jun 10 16:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:28 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun Jun 10 16:37:28 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun Jun 10 16:37:28 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly