[Sun Jun 10 10:21:51 2012] Detection parameters:
  Position = (221.4, 282.1) = 23 2 8.19 58 40 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.0 +/- 17.9
  Background counts = 86.7
  Rate = 0.01 +/- 0.003

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 5.71'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Jun 10 10:27:28 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.081
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 9.28"
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src62.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src62.csv
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src62_1.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src62.csv
[Sun Jun 10 16:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:28 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sun Jun 10 16:37:28 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sun Jun 10 16:37:28 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly