[Sun Jun 10 10:21:50 2012] Detection parameters:
  Position = (201.2, 300.1) = 23 2 19.48 58 41 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.3 +/- 19.1
  Background counts = 98.2
  Rate = 0.009 +/- 0.002

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 7.05'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 9.95"
[Sun Jun 10 10:27:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.158
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 9.95"
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src53.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src53.csv
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src53.csv
[Sun Jun 10 16:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Jun 10 16:37:28 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly