[Sun Jun 10 10:21:50 2012] Detection parameters:
  Position = (197.5, 289.1) = 23 2 21.53 58 41 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.3 +/- 19.6
  Background counts = 87.1
  Rate = 0.01 +/- 0.002

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 7.35'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Sun Jun 10 10:27:28 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.10"
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src31.csv
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src31.csv
[Sun Jun 10 16:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun 10 16:37:27 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly