[Sun Jun 10 10:21:49 2012] Detection parameters:
  Position = (202.6, 292.0) = 23 2 18.68 58 41 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.6 +/- 20.5
  Background counts = 90.5
  Rate = 0.01 +/- 0.002

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 6.96'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Sun Jun 10 10:27:28 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.972
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.91"
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src29.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src29.csv
[Sun Jun 10 16:37:25 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Jun 10 16:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src29.csv
[Sun Jun 10 16:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Jun 10 16:37:27 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly