[Sun Jun 10 10:21:49 2012] Detection parameters:
  Position = (206.1, 302.8) = 23 2 16.77 58 42 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.3 +/- 21.6
  Background counts = 101.1
  Rate = 0.03 +/- 0.004

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 6.70'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Sun Jun 10 10:27:28 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.192
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.78"
[Sun Jun 10 16:37:24 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jun 10 16:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src23.csv
[Sun Jun 10 16:37:24 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jun 10 16:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src23.csv
[Sun Jun 10 16:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jun 10 16:37:27 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jun 10 16:37:27 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly