[Sun Jun 10 10:21:48 2012] Detection parameters:
  Position = (373.4, 418.9) = 23 0 43.18 58 50 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.5 +/- 24.2
  Background counts = 69.2
  Rate = 0.02 +/- 0.002

[Sun Jun 10 10:21:53 2012] Off-axis axis estimate = 10.29'
[Sun Jun 10 10:27:28 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 10:27:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 10:27:28 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Sun Jun 10 10:27:28 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.051
[Sun Jun 10 10:27:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.57"
[Sun Jun 10 16:37:24 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 10 16:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 10 16:37:24 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 10 16:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 10 16:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:37:26 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 10 16:37:26 2012] fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 10 16:37:26 2012] Fit fullrun_pn_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly