[Sun Jun 10 10:22:57 2012] Detection parameters:
  Position = (246.4, 307.6) = 23 1 54.26 58 42 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.4 +/- 17.5
  Background counts = 62.1
  Rate = 0.009 +/- 0.001

[Sun Jun 10 10:22:58 2012] Off-axis axis estimate = 3.83'
[Sun Jun 10 16:37:29 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 16:37:29 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Sun Jun 10 16:37:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Sun Jun 10 16:37:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.34"
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src3.csv
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src3.csv
[Sun Jun 10 19:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 10 19:08:48 2012] Fit fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly