[Sun Jun 10 10:22:57 2012] Detection parameters:
  Position = (306.2, 331.8) = 23 1 20.89 58 44 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.0 +/- 17.9
  Background counts = 75.3
  Rate = 0.006 +/- 0.001

[Sun Jun 10 10:22:58 2012] Off-axis axis estimate = 2.49'
[Sun Jun 10 16:37:29 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 16:37:29 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sun Jun 10 16:37:29 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.781
[Sun Jun 10 16:37:29 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.67"
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src10.csv
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src10.csv
[Sun Jun 10 19:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 10 19:08:48 2012] Fit fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly