[Sun Jun 10 10:22:57 2012] Detection parameters:
  Position = (242.2, 205.2) = 23 1 56.49 58 34 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.9 +/- 12.3
  Background counts = 17.0
  Rate = 0.009 +/- 0.001

[Sun Jun 10 10:22:58 2012] Off-axis axis estimate = 7.89'
[Sun Jun 10 16:37:29 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 16:37:29 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Sun Jun 10 16:37:29 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.901
[Sun Jun 10 16:37:29 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.38"
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src4.csv
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src4.csv
[Sun Jun 10 19:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun 10 19:08:48 2012] Fit fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly