[Sun Jun 10 10:22:57 2012] Detection parameters:
  Position = (391.4, 450.1) = 23 0 33.04 58 52 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.2 +/- 15.2
  Background counts = 28.1
  Rate = 0.006 +/- 0.0008

[Sun Jun 10 10:22:58 2012] Off-axis axis estimate = 12.90'
[Sun Jun 10 16:37:29 2012] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 16:37:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 10 16:37:29 2012] Initial guess for spatial extent in simple fitting = 12.88"
[Sun Jun 10 16:37:29 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.023
[Sun Jun 10 16:37:29 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.88"
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src8.csv
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src8.csv
[Sun Jun 10 19:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jun 10 19:08:48 2012] Fit fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly