[Sun Jun 10 10:22:56 2012] Detection parameters:
  Position = (157.7, 243.2) = 23 2 43.63 58 37 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.5 +/- 15.5
  Background counts = 15.7
  Rate = 0.008 +/- 0.0008

[Sun Jun 10 10:22:58 2012] Off-axis axis estimate = 10.96'
[Sun Jun 10 16:37:29 2012] Using EEF radius (= 11.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 16:37:29 2012] Initial guess for spatial extent in simple fitting = 11.91"
[Sun Jun 10 16:37:29 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.002
[Sun Jun 10 16:37:29 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.91"
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src6.csv
[Sun Jun 10 19:08:47 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 10 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src6.csv
[Sun Jun 10 19:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 10 19:08:48 2012] fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 10 19:08:48 2012] Fit fullrun_mos1_xmm0057540101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly