[Thu Sep  6 08:15:58 2012] Detection parameters:
  Position = (277.9, 286.8) = 16 32 32.11 82 32 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28989.9 +/- 201.6
  Background counts = 80.8
  Rate = 0.6 +/- 0.004

[Thu Sep  6 08:15:58 2012] Off-axis axis estimate = 1.71'
[Thu Sep  6 09:24:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 09:24:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Sep  6 09:24:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Thu Sep  6 09:24:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Sep  6 09:40:25 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep  6 09:40:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 09:40:25 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep  6 09:40:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_src1.csv
[Thu Sep  6 09:40:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 09:40:25 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep  6 09:40:25 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep  6 09:40:25 2012] Fit fullrun_mos2_xmm0056340201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep  6 09:40:34 2012] Spatial fit model total counts = 24630.700000, observed total counts = 24151.000000
[Thu Sep  6 09:40:34 2012] Offset between fit and detection position for source 1 = 0.133494 pixels
[Thu Sep  6 09:40:34 2012] 24626.960000 total counts/ 5983.860000 bgd. counts: snr = 241.005757
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.133494 pixels
  Position = (277.9, 286.7) = 16 32 32.09 82 32 17.6
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 18643.1 +/- 156.9
  Background counts = 5983.9
  Rate = 0.4 +/- 0.004
[Thu Sep  6 09:40:34 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 09:40:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 09:40:34 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 09:40:34 2012] Source does appear to be extended
[Thu Sep  6 09:40:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 10:47:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 10:47:22 2012] Initial guess for spatial extent in simple fitting = 5.53"
[Thu Sep  6 10:47:22 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.957
[Thu Sep  6 10:47:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.53"
[Thu Sep  6 11:03:40 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep  6 11:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 11:03:40 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep  6 11:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 11:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 11:03:40 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep  6 11:03:40 2012] fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep  6 11:03:40 2012] Fit fullrun_mos2_xmm0056340201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep  6 11:03:55 2012] Spatial fit model total counts = 24562.700000, observed total counts = 24039.000000
[Thu Sep  6 11:03:55 2012] Offset between fit and detection position for source 1 = 0.017619 pixels
[Thu Sep  6 11:03:55 2012] 24763.370000 total counts/ 6219.970000 bgd. counts: snr = 235.123058
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017619 pixels
  Position = (277.9, 286.6) = 16 32 32.12 82 32 17.6
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 18543.4 +/- 157.4
  Background counts = 6220.0
  Rate = 0.4 +/- 0.004
[Thu Sep  6 11:03:55 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 11:03:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 11:03:55 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 11:03:55 2012] Source does appear to be extended
[Thu Sep  6 11:03:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 11:40:37 2012] Counts = 18543.400000, rescaling region sizes by 3.000000
[Thu Sep  6 11:40:37 2012] XMMSAS src. selection expression = ellipse(24125.094400, 24889.590400, 988.561828, 988.561828, 0.000000, X, Y)
[Thu Sep  6 11:40:37 2012] Writing source region out to fullrun_mos2_xmm0056340201_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep  6 11:40:37 2012] Extracting stamp from image fullrun_mos2_xmm0056340201_pi300-10000_cl_sm2.00.img.gz, (221, 230) - (335, 343)
[Thu Sep  6 11:40:37 2012] XMMSAS bgd. selection expression = annulus(24125.094400, 24889.590400, 4942.809142, 9885.618284, X, Y) && !ellipse(18685.068115, 22833.992126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14433.231186, 28116.687988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29512.418304, 18059.186111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.413513, 23260.442932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16230.684692, 18898.093063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19398.258102, 21141.841064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24851.923248, 32636.774475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14060.423920, 22389.548187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23835.072000, 27668.014600, 759.344822, 759.344822, 0.000000, X, Y)
[Thu Sep  6 11:40:37 2012] Writing fullrun_mos2_xmm0056340201_pi300-10000_pass1_cl_src1.gif
[Thu Sep  6 11:40:45 2012] Mean detx,y = (80.06, 93.84) 
[Thu Sep  6 11:40:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 11:43:41 2012] grppha failed
[Thu Sep  6 11:43:41 2012] Setting source spectrum file to fullrun_mos2_xmm0056340201_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 11:43:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0056340201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep  6 11:48:35 2012] Updating aperture counts using extracted products
[Thu Sep  6 11:48:35 2012] Error reading totcts from fullrun_mos2_xmm0056340201_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 11:48:35 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 11:48:37 2012] Source 1 has no response, skipping
[Thu Sep  6 11:48:38 2012] xmm0056340201/analysis//spectral/fullrun_mos2_xmm0056340201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete