[Sat Sep 24 23:07:39 2011] Detection parameters:
  Position = (303.1, 296.1) = 12 19 20.85 5 51 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.6 +/- 13.3
  Background counts = 27.5
  Rate = 0.003 +/- 0.0004

[Sat Sep 24 23:07:39 2011] Off-axis axis estimate = 0.37'
[Sun Sep 25 00:31:00 2011] Using EEF radius (= 6.62 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:31:00 2011] Initial guess for spatial extent in simple fitting = 6.62"
[Sun Sep 25 00:31:00 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Sun Sep 25 00:31:00 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 6.62"
[Sun Sep 25 01:04:11 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_src19.ximg exists
[Sun Sep 25 01:04:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_src19.csv
[Sun Sep 25 01:04:11 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Sep 25 01:04:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_src19.csv
[Sun Sep 25 01:04:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 01:04:12 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Sep 25 01:04:12 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Sep 25 01:04:12 2011] Fit fullrun_mos2_xmm0056340101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Sep 25 01:04:29 2011] Source 18 is offset by -6.025679 and -6.962538 pixels which is larger than
2 X fitted extent = 1.149540 x 1.149540, not incorporating fit results
[Sun Sep 25 01:04:29 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 01:04:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 01:04:29 2011] Assessing source extent using major
[Sun Sep 25 01:04:29 2011] Source does appear to be extended
[Sun Sep 25 01:04:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 02:24:02 2011] Using EEF radius (= 6.62 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 02:24:02 2011] Initial guess for spatial extent in simple fitting = 6.62"
[Sun Sep 25 02:24:02 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Sun Sep 25 02:24:02 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 6.62"
[Sun Sep 25 03:02:12 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass1_src19.ximg exists
[Sun Sep 25 03:02:12 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Sep 25 03:02:12 2011] Fit fullrun_mos2_xmm0056340101_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun Sep 25 03:02:12 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Sep 25 03:02:12 2011] fullrun_mos2_xmm0056340101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Sep 25 03:02:12 2011] Fit fullrun_mos2_xmm0056340101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Sep 25 03:02:35 2011] Source 18 is offset by -4.970939 and -5.862115 pixels which is larger than
2 X fitted extent = 0.983908 x 5.480000, not incorporating fit results
[Sun Sep 25 03:02:35 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 03:02:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 03:02:35 2011] Assessing source extent using major
[Sun Sep 25 03:02:35 2011] Source does appear to be extended
[Sun Sep 25 03:02:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:05:30 2011] XMMSAS src. selection expression = ellipse(26317.541901, 25714.035156, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 05:05:30 2011] Writing source region out to fullrun_mos2_xmm0056340101_pi300-10000_pass1_cl_src18_src.reg
[Sun Sep 25 05:05:30 2011] Extracting stamp from image fullrun_mos2_xmm0056340101_pi300-10000_cl_sm2.00.img.gz, (266, 259) - (341, 334)
[Sun Sep 25 05:05:30 2011] XMMSAS bgd. selection expression = annulus(26317.541901, 25714.035156, 1087.500000, 2175.000000, X, Y) && !ellipse(25575.235400, 23790.236200, 573.184816, 573.184816, 0.000000, X, Y) && !ellipse(24963.997345, 23516.255005, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 05:05:30 2011] Writing fullrun_mos2_xmm0056340101_pi300-10000_pass1_cl_src18.gif
[Sun Sep 25 05:11:18 2011] Mean detx,y = (1393.62, -1250.80) 
[Sun Sep 25 05:11:19 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 05:11:28 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 05:11:29 2011] Setting source spectrum file to fullrun_mos2_xmm0056340101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Sep 25 05:11:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0056340101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Sep 25 05:30:49 2011] Not generating rmf since there are only 83 counts
[Sun Sep 25 05:30:49 2011] rmf not generated due to insufficient counts
[Sun Sep 25 05:31:44 2011] Updating aperture counts using extracted products
[Sun Sep 25 05:31:44 2011] Error reading totcts from fullrun_mos2_xmm0056340101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Sep 25 05:31:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 05:31:44 2011] Using photon index=1.80, rate=0.00264, arf fullrun_mos2_xmm0056340101_pi300-10000_pass1_cl_src18.arf
[Sun Sep 25 05:31:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 05:31:44 2011] Updating source flux to 3e-14
[Sun Sep 25 05:32:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting