[Sat Sep 24 23:07:15 2011] Detection parameters:
  Position = (285.0, 284.0) = 12 19 26.13 5 50 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.6 +/- 12.5
  Background counts = 30.6
  Rate = 0.002 +/- 0.0004

[Sat Sep 24 23:07:15 2011] Off-axis axis estimate = 1.43'
[Sun Sep 25 00:03:43 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 00:03:43 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Sun Sep 25 00:03:43 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Sun Sep 25 00:03:43 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 7.14"
[Sun Sep 25 00:31:00 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Sep 25 00:31:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_src21.csv
[Sun Sep 25 00:31:00 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Sep 25 00:31:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_src21.csv
[Sun Sep 25 00:31:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 00:31:00 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Sep 25 00:31:00 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Sep 25 00:31:00 2011] Fit fullrun_mos1_xmm0056340101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Sep 25 01:04:24 2011] Source 15 is offset by -6.612226 and 5.578993 pixels which is larger than
2 X fitted extent = 5.723448 x 5.723448, not incorporating fit results
[Sun Sep 25 01:04:24 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 01:04:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 01:04:24 2011] Assessing source extent using major
[Sun Sep 25 01:04:24 2011] Source does appear to be extended
[Sun Sep 25 01:04:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 01:52:14 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 01:52:14 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Sun Sep 25 01:52:14 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Sun Sep 25 01:52:14 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 7.14"
[Sun Sep 25 02:24:01 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_src18.ximg exists
[Sun Sep 25 02:24:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_src18.csv
[Sun Sep 25 02:24:01 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Sep 25 02:24:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_src18.csv
[Sun Sep 25 02:24:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 02:24:02 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Sep 25 02:24:02 2011] fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Sep 25 02:24:02 2011] Fit fullrun_mos1_xmm0056340101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Sep 25 03:02:28 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 186.645954 pixels away
[Sun Sep 25 03:02:28 2011] Source 15 is offset by -6.612226 and 5.578993 pixels which is larger than
2 X fitted extent = 5.756966 x 5.756966, not incorporating fit results
[Sun Sep 25 03:02:28 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 03:02:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 03:02:28 2011] Assessing source extent using major
[Sun Sep 25 03:02:28 2011] Source does appear to be extended
[Sun Sep 25 03:02:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 04:38:01 2011] XMMSAS src. selection expression = ellipse(24742.780304, 24660.328369, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 04:38:01 2011] Writing source region out to fullrun_mos1_xmm0056340101_pi300-10000_pass1_cl_src15_src.reg
[Sun Sep 25 04:38:01 2011] Extracting stamp from image fullrun_mos1_xmm0056340101_pi300-10000_cl_sm2.00.img.gz, (247, 247) - (322, 322)
[Sun Sep 25 04:38:01 2011] XMMSAS bgd. selection expression = annulus(24742.780304, 24660.328369, 1087.500000, 2175.000000, X, Y) && !ellipse(25586.705000, 23783.830800, 564.936016, 564.936016, 0.000000, X, Y) && !ellipse(23178.069560, 22331.379200, 333.571210, 231.068007, 103.117308, X, Y)
[Sun Sep 25 04:38:01 2011] Writing fullrun_mos1_xmm0056340101_pi300-10000_pass1_cl_src15.gif
[Sun Sep 25 04:42:09 2011] Mean detx,y = (-687.39, 176.61) 
[Sun Sep 25 04:42:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 04:42:18 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 04:42:18 2011] Setting source spectrum file to fullrun_mos1_xmm0056340101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Sep 25 04:42:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0056340101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Sep 25 05:05:20 2011] Not generating rmf since there are only 50 counts
[Sun Sep 25 05:05:20 2011] rmf not generated due to insufficient counts
[Sun Sep 25 05:31:43 2011] Updating aperture counts using extracted products
[Sun Sep 25 05:31:43 2011] Error reading totcts from fullrun_mos1_xmm0056340101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Sep 25 05:31:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 05:31:44 2011] Using photon index=1.80, rate=0.00159, arf fullrun_mos1_xmm0056340101_pi300-10000_pass1_cl_src15.arf
[Sun Sep 25 05:31:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 05:31:44 2011] Updating source flux to 1.6e-14
[Sun Sep 25 05:31:46 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting