[Wed Jun 19 15:32:40 2013] Detection parameters:
  Position = (210.8, 259.7) = 3 18 45.77 -3 3 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.9 +/- 11.0
  Background counts = 25.2
  Rate = 0.004 +/- 0.0006

[Wed Jun 19 15:32:40 2013] Off-axis axis estimate = 6.95'
[Wed Jun 19 15:32:59 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 15:32:59 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Wed Jun 19 15:32:59 2013] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.714
[Wed Jun 19 15:32:59 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.90"
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jun 19 15:33:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src13.csv
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jun 19 15:33:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src13.csv
[Wed Jun 19 15:33:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jun 19 15:33:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jun 19 15:33:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 19 15:33:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 15:33:11 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 16.679516 pixels away
[Wed Jun 19 15:33:11 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 15:33:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 15:33:11 2013] Assessing source extent using major
[Wed Jun 19 15:33:11 2013] Source does appear to be extended
[Wed Jun 19 15:33:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 15:33:26 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 15:33:26 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Wed Jun 19 15:33:26 2013] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.714
[Wed Jun 19 15:33:26 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.90"
[Wed Jun 19 15:33:26 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 19 15:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src13.csv
[Wed Jun 19 15:33:26 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 19 15:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src13.csv
[Wed Jun 19 15:33:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 15:33:27 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 19 15:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jun 19 15:33:27 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 19 15:33:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Jun 19 15:33:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 15:33:37 2013] Spatial fit model total counts = 184.844000, observed total counts = 151.000000
[Wed Jun 19 15:33:37 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 15:33:37 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 15:33:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 15:33:37 2013] Assessing source extent using major
[Wed Jun 19 15:33:37 2013] Source does appear to be extended
[Wed Jun 19 15:33:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 15:33:54 2013] XMMSAS src. selection expression = ellipse(18291.955185, 22543.253143, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 19 15:33:54 2013] Not overwriting source region fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 19 15:33:54 2013] Extracting stamp from image fullrun_mos1_xmm0056022201_pi300-10000_cl_sm2.00.img.gz, (173, 222) - (248, 297)
[Wed Jun 19 15:33:54 2013] XMMSAS bgd. selection expression = annulus(18291.955185, 22543.253143, 1087.500000, 2175.000000, X, Y) && !ellipse(20741.179200, 23375.217600, 348.837610, 348.837610, 0.000000, X, Y) && !ellipse(21652.996597, 23568.338715, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Jun 19 15:33:54 2013] Writing fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17.gif
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/events/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0056022201/products/events/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Wed Jun 19 15:33:54 2013] Mean detx,y = (3604.88, 5272.49) 
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/images/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_src.img and ../../xmm0056022201/products/images/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/spectra/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0056022201/products/spectra/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Wed Jun 19 15:33:54 2013] Setting source spectrum file to fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 19 15:33:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/lightcurves/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0056022201/products/lightcurves/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Wed Jun 19 15:33:57 2013] Not generating rmf since there are only 63 counts
[Wed Jun 19 15:33:57 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:33:57 2013] fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Wed Jun 19 16:01:26 2013] Updating aperture counts using extracted products
[Wed Jun 19 16:01:26 2013] Total counts from fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 129.00
[Wed Jun 19 16:01:26 2013] Total counts from fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_bgd.pi.gz = 662.00
[Wed Jun 19 16:01:26 2013] Got source and background scale factors 1038420.000000, 9267670.000000
[Wed Jun 19 16:01:26 2013] User source parameters:
  Position = (210.8, 259.7) = 3 18 45.77 -3 3 9.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 54.8 +/- 12.4
  Background aperture counts = 74.2
  Rate = 0.003 +/- 0.0006

[Wed Jun 19 16:01:26 2013] Updating counts from extracted products
[Wed Jun 19 16:01:26 2013] Set source signif. to 54.82/8.61 = 6.37
[Wed Jun 19 16:01:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 16:01:28 2013] Using photon index=1.80, rate=0.00265, arf fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17.arf
[Wed Jun 19 16:01:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 16:01:28 2013] Updating source flux to 3.3e-14
[Wed Jun 19 16:01:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 16:01:45 2013] xmm0056022201/analysis//spectral/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete