[Wed Jun 19 15:32:40 2013] Detection parameters:
  Position = (286.6, 242.2) = 3 18 23.76 -3 4 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.6 +/- 14.8
  Background counts = 28.5
  Rate = 0.006 +/- 0.0007

[Wed Jun 19 15:32:40 2013] Off-axis axis estimate = 4.17'
[Wed Jun 19 15:32:59 2013] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 15:32:59 2013] Initial guess for spatial extent in simple fitting = 8.51"
[Wed Jun 19 15:32:59 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.829
[Wed Jun 19 15:32:59 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.51"
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 19 15:33:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src7.csv
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 19 15:33:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src7.csv
[Wed Jun 19 15:33:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 19 15:33:00 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 19 15:33:00 2013] Fit fullrun_mos1_xmm0056022201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jun 19 15:33:11 2013] Spatial fit model total counts = 239.086000, observed total counts = 230.000000
[Wed Jun 19 15:33:11 2013] Offset between fit and detection position for source 10 = 0.144948 pixels
[Wed Jun 19 15:33:11 2013] 240.777200 total counts/ 171.058000 bgd. counts: snr = 5.330657
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.144948 pixels
  Position = (286.6, 242.1) = 3 18 23.75 -3 4 25.2
  Extent = 3.5 (2.7-4.5)", rotation angle = 0
  Source counts = 69.7 +/- 15.5
  Background counts = 171.1
  Rate = 0.003 +/- 0.0007
[Wed Jun 19 15:33:11 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 15:33:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 15:33:11 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 15:33:11 2013] Source does appear to be extended
[Wed Jun 19 15:33:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 15:33:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 19 15:33:26 2013] Initial guess for spatial extent in simple fitting = 3.52"
[Wed Jun 19 15:33:26 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.876
[Wed Jun 19 15:33:26 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 3.52"
[Wed Jun 19 15:33:26 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jun 19 15:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src7.csv
[Wed Jun 19 15:33:26 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jun 19 15:33:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src7.csv
[Wed Jun 19 15:33:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 15:33:26 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jun 19 15:33:26 2013] fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jun 19 15:33:26 2013] Fit fullrun_mos1_xmm0056022201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jun 19 15:33:37 2013] Spatial fit model total counts = 243.186000, observed total counts = 236.000000
[Wed Jun 19 15:33:37 2013] Offset between fit and detection position for source 10 = 0.005058 pixels
[Wed Jun 19 15:33:37 2013] 243.632300 total counts/ 173.898000 bgd. counts: snr = 5.288094
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.005058 pixels
  Position = (286.6, 242.1) = 3 18 23.75 -3 4 25.2
  Extent = 3.5 (2.7-4.5)", rotation angle = 0
  Source counts = 69.7 +/- 15.6
  Background counts = 173.9
  Rate = 0.003 +/- 0.0008
[Wed Jun 19 15:33:37 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 15:33:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 15:33:37 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 15:33:37 2013] Source does appear to be extended
[Wed Jun 19 15:33:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 15:33:54 2013] XMMSAS src. selection expression = ellipse(24889.372400, 21013.098800, 211.083006, 211.083006, 0.000000, X, Y)
[Wed Jun 19 15:33:54 2013] Not overwriting source region fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 19 15:33:54 2013] Extracting stamp from image fullrun_mos1_xmm0056022201_pi300-10000_cl_sm2.00.img.gz, (275, 230) - (299, 254)
[Wed Jun 19 15:33:54 2013] XMMSAS bgd. selection expression = annulus(24889.372400, 21013.098800, 351.805010, 703.610020, X, Y)
[Wed Jun 19 15:33:54 2013] Writing fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10.gif
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/events/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0056022201/products/events/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Jun 19 15:33:54 2013] Mean detx,y = (3605.23, -1483.95) 
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/images/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_src.img and ../../xmm0056022201/products/images/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/spectra/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0056022201/products/spectra/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Jun 19 15:33:54 2013] Setting source spectrum file to fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 19 15:33:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 19 15:33:54 2013] ../../xmm0056022201/products/lightcurves/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0056022201/products/lightcurves/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Jun 19 15:33:57 2013] Not generating rmf since there are only 69 counts
[Wed Jun 19 15:33:57 2013] rmf not generated due to insufficient counts
[Wed Jun 19 15:33:57 2013] fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Wed Jun 19 16:01:24 2013] Updating aperture counts using extracted products
[Wed Jun 19 16:01:24 2013] Total counts from fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 84.00
[Wed Jun 19 16:01:24 2013] Total counts from fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 84.00
[Wed Jun 19 16:01:24 2013] Got source and background scale factors 139200.000000, 1029924.000000
[Wed Jun 19 16:01:24 2013] User source parameters:
  Position = (286.6, 242.1) = 3 18 23.75 -3 4 25.2
  Extent = 3.5 (2.7-4.5)", rotation angle = 0
  Source aperture counts = 72.6 +/- 10.2
  Background aperture counts = 11.4
  Rate = 0.004 +/- 0.0005

[Wed Jun 19 16:01:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 16:01:28 2013] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10.arf
[Wed Jun 19 16:01:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 16:01:28 2013] Updating source flux to 5.3e-14
[Wed Jun 19 16:01:37 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 16:01:45 2013] xmm0056022201/analysis//spectral/fullrun_mos1_xmm0056022201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete