[Thu May 31 19:12:55 2012] Detection parameters:
  Position = (317.3, 308.1) = 22 37 0.09 -15 16 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 367.5 +/- 25.8
  Background counts = 36.3
  Rate = 0.02 +/- 0.001

[Thu May 31 19:12:55 2012] Off-axis axis estimate = 1.53'
[Thu May 31 19:14:59 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:14:59 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Thu May 31 19:14:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Thu May 31 19:14:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.20"
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 31 20:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src5.csv
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 31 20:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src5.csv
[Thu May 31 20:16:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 31 20:16:20 2012] Fit fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 31 21:49:17 2012] Spatial fit model total counts = 1316.770000, observed total counts = 1314.000000
[Thu May 31 21:49:17 2012] Offset between fit and detection position for source 5 = 0.655071 pixels
[Thu May 31 21:49:17 2012] 1304.182000 total counts/ 990.765000 bgd. counts: snr = 9.957200
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.655071 pixels
  Position = (317.4, 308.7) = 22 37 0.04 -15 16 24.4
  Extent = 11.6 (9.4-14.4)", rotation angle = 0
  Source counts = 313.4 +/- 36.1
  Background counts = 990.8
  Rate = 0.02 +/- 0.002
[Thu May 31 21:49:17 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:17 2012] Assessing source extent using major axis lower bound
[Thu May 31 21:49:17 2012] Source does appear to be extended
[Thu May 31 21:49:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 21:49:17 2012] Source is confused with source 15
[Thu May 31 21:49:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 21:49:38 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Thu May 31 21:49:38 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.049
[Thu May 31 21:49:38 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.59"
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src5.csv
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src5.csv
[Thu May 31 22:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 31 22:55:30 2012] Fit fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun  1 00:16:35 2012] Warning, spatial fit 5 centroid is now closest to src. 15
[Fri Jun  1 00:16:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:36 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:16:36 2012] Source does appear to be extended
[Fri Jun  1 00:16:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:16:54 2012] XMMSAS src. selection expression = ellipse(27568.744800, 26810.754600, 695.244020, 695.244020, 0.000000, X, Y)
[Fri Jun  1 00:16:54 2012] Writing source region out to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun  1 00:16:54 2012] Extracting stamp from image fullrun_pn_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (277, 269) - (357, 349)
[Fri Jun  1 00:16:54 2012] XMMSAS bgd. selection expression = annulus(27568.744800, 26810.754600, 1158.740033, 2317.480067, X, Y) && !ellipse(30250.590790, 28728.693481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.384600, 26721.090200, 843.320024, 843.320024, 0.000000, X, Y) && !ellipse(30543.042267, 24709.149048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27232.256000, 26988.746000, 1143.512033, 1143.512033, 0.000000, X, Y) && !ellipse(26926.565796, 26055.222351, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 00:16:54 2012] Writing fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src5.gif
[Fri Jun  1 00:18:46 2012] Mean detx,y = (194.81, 87.04) 
[Fri Jun  1 00:18:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 00:19:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 00:19:06 2012] Setting source spectrum file to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 00:19:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun  1 01:33:55 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:55 2012] Error reading totcts from fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 01:33:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:56 2012] Using photon index=1.80, rate=0.0162, arf fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src5.arf
[Fri Jun  1 01:33:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:56 2012] Updating source flux to 3.8e-14
[Fri Jun  1 01:34:19 2012] Flag c found in src. 5 procflags, skipping spectral fitting