[Thu May 31 19:12:55 2012] Detection parameters:
  Position = (307.7, 315.9) = 22 37 2.95 -15 15 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.1 +/- 13.5
  Background counts = 36.3
  Rate = 0.004 +/- 0.0008

[Thu May 31 19:12:55 2012] Off-axis axis estimate = 1.44'
[Thu May 31 19:14:59 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:14:59 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Thu May 31 19:14:59 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Thu May 31 19:14:59 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.15"
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src31.ximg exists
[Thu May 31 20:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src31.csv
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu May 31 20:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src31.csv
[Thu May 31 20:16:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu May 31 20:16:20 2012] Fit fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu May 31 21:49:17 2012] Warning, spatial fit 31 centroid is now closest to src. 15
[Thu May 31 21:49:17 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:17 2012] Assessing source extent using major
[Thu May 31 21:49:17 2012] Source does appear to be extended
[Thu May 31 21:49:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 21:49:38 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Thu May 31 21:49:38 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Thu May 31 21:49:38 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Thu May 31 21:49:38 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.15"
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src31.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src31.csv
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src31.csv
[Thu May 31 22:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu May 31 22:55:31 2012] Fit fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Jun  1 00:16:36 2012] Spatial fit model total counts = 663.196000, observed total counts = 637.000000
[Fri Jun  1 00:16:36 2012] Offset between fit and detection position for source 32 = 7.786261 pixels
[Fri Jun  1 00:16:36 2012] 653.830900 total counts/ 582.068000 bgd. counts: snr = 2.974494
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 7.786261 pixels
  Position = (313.6, 310.8) = 22 37 1.20 -15 16 15.5
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 71.8 +/- 25.6
  Background counts = 582.1
  Rate = 0.004 +/- 0.001
[Fri Jun  1 00:16:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:36 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 00:16:36 2012] Source does appear to be extended
[Fri Jun  1 00:16:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:16:36 2012] Source is confused with source 5
[Fri Jun  1 00:16:36 2012] Source is confused with source 15
[Fri Jun  1 00:16:55 2012] XMMSAS src. selection expression = ellipse(27232.256000, 26988.746000, 857.634025, 857.634025, 0.000000, X, Y)
[Fri Jun  1 00:16:55 2012] Writing source region out to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src32_src.reg
[Fri Jun  1 00:16:55 2012] Extracting stamp from image fullrun_pn_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (264, 261) - (363, 360)
[Fri Jun  1 00:16:55 2012] XMMSAS bgd. selection expression = annulus(27232.256000, 26988.746000, 1429.390041, 2858.780082, X, Y) && !ellipse(27568.744800, 26810.754600, 926.992027, 926.992027, 0.000000, X, Y) && !ellipse(30250.590790, 28728.693481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27606.384600, 26721.090200, 843.320024, 843.320024, 0.000000, X, Y) && !ellipse(30543.042267, 24709.149048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26926.565796, 26055.222351, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 00:16:55 2012] Writing fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src32.gif
[Fri Jun  1 00:31:32 2012] Mean detx,y = (-46.64, 21.99) 
[Fri Jun  1 00:31:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 00:32:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 00:32:16 2012] Setting source spectrum file to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jun  1 00:32:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Jun  1 01:05:09 2012] Not generating rmf since there are only 71 counts
[Fri Jun  1 01:05:09 2012] rmf not generated due to insufficient counts
[Fri Jun  1 01:33:56 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:56 2012] Error reading totcts from fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jun  1 01:33:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:57 2012] Using photon index=1.80, rate=0.00371, arf fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src32.arf
[Fri Jun  1 01:33:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:57 2012] Updating source flux to 8.6e-15
[Fri Jun  1 01:34:19 2012] Flag c found in src. 32 procflags, skipping spectral fitting
[Fri Jun  1 01:34:19 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting