[Thu May 31 19:12:55 2012] Detection parameters:
  Position = (290.6, 149.2) = 22 37 8.10 -15 27 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.5 +/- 13.6
  Background counts = 23.6
  Rate = 0.005 +/- 0.0007

[Thu May 31 19:12:55 2012] Off-axis axis estimate = 10.83'
[Thu May 31 19:14:59 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:14:59 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Thu May 31 19:14:59 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Thu May 31 19:14:59 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.84"
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 31 20:16:20 2012] Fit fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_src10 appears to have run properly
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 31 20:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 31 20:16:20 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 31 20:16:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 31 20:16:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:49:17 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.513608 pixels away
[Thu May 31 21:49:17 2012] Vigneting correction estimate = 1.000000
[Thu May 31 21:49:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 21:49:17 2012] Assessing source extent using major
[Thu May 31 21:49:17 2012] Source does appear to be extended
[Thu May 31 21:49:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 21:49:38 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Thu May 31 21:49:38 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Thu May 31 21:49:38 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Thu May 31 21:49:38 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.84"
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src10.csv
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src10.csv
[Thu May 31 22:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 31 22:55:30 2012] fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 31 22:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 31 22:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0056021601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:16:35 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.513608 pixels away
[Fri Jun  1 00:16:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 00:16:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 00:16:36 2012] Assessing source extent using major
[Fri Jun  1 00:16:36 2012] Source does appear to be extended
[Fri Jun  1 00:16:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:16:54 2012] XMMSAS src. selection expression = ellipse(25236.971527, 12936.158401, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 00:16:54 2012] Writing source region out to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun  1 00:16:54 2012] Extracting stamp from image fullrun_pn_xmm0056021601_pi300-10000_cl_sm2.00.img.gz, (253, 112) - (328, 187)
[Fri Jun  1 00:16:54 2012] XMMSAS bgd. selection expression = annulus(25236.971527, 12936.158401, 1087.500000, 2175.000000, X, Y) && !ellipse(27853.845398, 11774.981339, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 00:16:54 2012] Writing fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src10.gif
[Fri Jun  1 00:20:59 2012] Mean detx,y = (2640.81, 13854.69) 
[Fri Jun  1 00:21:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 00:21:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 00:21:16 2012] Setting source spectrum file to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  1 00:21:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun  1 00:49:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  1 00:49:56 2012] rmf not generated due to insufficient counts
[Fri Jun  1 01:33:55 2012] Updating aperture counts using extracted products
[Fri Jun  1 01:33:55 2012] Error reading totcts from fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  1 01:33:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 01:33:56 2012] Using photon index=1.80, rate=0.00549, arf fullrun_pn_xmm0056021601_pi300-10000_pass1_cl_src10.arf
[Fri Jun  1 01:33:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 01:33:56 2012] Updating source flux to 3.5e-14
[Fri Jun  1 01:34:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting